A2 Basic US 222 Folder Collection
After playing the video, you can click or select the word to look it up in the dictionary.
Loading...
Report Subtitle Errors
hello everyone and welcome in this video
we're gonna be talking about five things
which you should never do in a brand-new
vehicle now the definition of brand-new
of course will change depending on the
vehicle but generally we're going to be
talking about the first thousand miles
of which you're going to be breaking in
your vehicle so check your owners manual
it'll tell you you know what that
break-in period is but we're gonna be
talking about five things which you
shouldn't be doing during that time
now I think it goes without saying but I'm
going to say it anyways
in the event of an emergency ignore
everything in this video and just do
whatever you need to do to be safe
like I said I think it goes without
saying but some people out there may
value their car over their own life you
shouldn't do that you should value your
own life so you know the biggest things
were going to get into of course have to
relate to the engine and these are going
to get somewhat controversial but you
know one of the biggest things about
breaking in a new vehicles breaking in
the engine and making sure that these
piston rings seat properly on your
cylinder wall so on your cylinder wall
you know you've got that freshly home
cylinder bore and you want to make sure
you get a nice seal between that and
these piston rings now these piston
rings have some spring tension in them
which allow them to expand out and rub
against that cylinder wall but that's
not really what's going to be doing the
majority of wearing in this piston ring
on that cylinder wall really you've got
the combustion process occurring on top
of it
those gases are going to pass in here
they're going to get in these gaps get
behind the piston ring and force that
piston ring out and expand it out on
that cylinder wall and that pressure is
what's going to wear down that cylinder
bore now you don't need an excessive
amount of pressure to do this and this
is where it gets kind of controversial
so points1 into don't floor it and
point2 don't bring it all the way up to
you know red line to your highest RPM
and you know there's certainly people
out there will say heartbreaking is
necessary
we're going to talk about you know kind
of why that's not true based on all the
data that's out there based on all the
information that's out there and based
on what all the manufacturers out there
recommend and so basically what you're
doing like I said your ceiling these
piston rings up against that cylinder
bore and wearing it down to have a nice
seal now you don't want to do this too
fast and with too much pressure
there's no reason you can cause damage
if there are imperfections you're going
to wear down those infamous
imperfections too quickly and that could
cause hot spots which could cause
problems
so you want a nice gradual aware of that
cylinder bore with
these piston rings so that you create
that good seal and some people out there
will say you know for performance if you
want maximum power you need to florina
get that perfect seal on the only way to
do that is with super-high pressure but
if you look at performance cars and what
they recommend this is not what they
recommend doing so just a few examples
starting with the Nissan GTR for the
first 300 miles they recommend not going
over fifty percent throttle and they
recommend not going over 3,500 rpm and
that's for those first three hundred
miles and so you know as you can see i
mean obviously the GTRs performance
vehicle obviously they wanted to have
the performance that you expect from it
why would they recommend that I if they
didn't you know believe that to be true
if you know the best method of breaking
in that engine was with lighter throttle
applications and without going to super
high rpm another interesting example is
the new acura nsx and one of the cool
things that they do is they break this
in from the factory and so they have a
procedure where they put the equivalent
of about a hundred fifty miles on the
engine varying the load and not
exceeding 4000rpm on the engine and what
they say this does is that when the
customer takes delivery of their new NSX
they can go straight to the track
because they've already put in this
engine break-in process and so you know
from the factory the cars good to go you
can take it out to the track now why
would a cura spend the time and spend
the money on breaking in an engine
keeping it under 4,000 rpm varying the
load if it wasn't necessary to do for
the safety and performance of that
engine they wouldn't it would be a waste
of time and money like i said and so you
know these are just another example out
there of a company which doesn't break
in from the factory that's their
procedure keep it under 4,000 rpm
through the equivalent about a hundred
and fifty miles and then let the
customer thrashing on the track on day
one so cool thing that they do actually
don't have to do the break-in procedure
another example is the Corvette the new
Corvette the c7 you know they recommend
and they specifically say for
performance reasons and you don't want
to exceed 4000rpm and you don't want to
do full throttle starts in the new
Corvette basically in those first 500
miles and then they have a separate
procedure for the next thousand and they
have you know a total of fifteen hundred
miles of breaking but for those first
500 keep it below 4000 RPM and don't
floor it from a start so you know more
recommendation
he's out there these are different
companies they're all saying very
similar things and actually had the
honor to speak with someone who worked
in FCS performance engine division they
actually have their own land speed
record car where they took a two liter
out of a dodge neon srt-4 and you know
boosted that up to i believe 800
horsepower of an absurd amount of boost
in it and you know they had they were
telling me they're breaking procedure
for that engine with 800 horsepower and
once again it was varying the load and
it was changing the RPM but not going to
high believe the highest he went was
4,000 rpm and asked him you know you
work in this world you have access to
this data you know is there any
advantage of a heartbreak and he said
absolutely not there's no advantage to
it you know it's just a risk and so it's
an unnecessary risk
you can do a lighter break-in obviously
don't baby the vehicle give it you know
decent throttle give it half throttle
something like that but you don't want
to floor it out because you can run into
that risk of causing damage if you get
things in there too hot where these
imperfections lie you want to wear them
down more gradually rather than quickly
now yes manufacturing tolerances have
greatly improved and it's always getting
better but this doesn't necessarily
eliminate the need for break-in period
typically what it just means is that the
break-in period will be shorter than
they previously were as a result of
better manufacturing tolerances
ok so we have points 1 and 2 don't floor
it don't bring it up to redline and our
third we're going to talk about don't
use cruise control and really the reason
why you don't want to use cruise control
is because you want to vary that engine
rpm as you're driving and when you set
cruise control
you're just gonna have one set engine
rpm especially with manual transmission
vehicles which obviously aren't going to
shift for you but basically don't want
to use cruise control because you don't
want to keep it at a constant speed you
want to vary the engines load and you
want to vary the engine speed so that it
gets used to all these varying
conditions and it properly wears it in
so you know you can take that into
consideration and think you know maybe
you shouldn't do a thousand mile road
trip as the first trip in your car
because you're probably just gonna be
sitting on the highway at one set speed
at once at throttle position at one set
RPM and so you really want to bury the
conditions for a proper break in moving
on
to number four you want to make sure
that you avoid short distance travelled
by short distance trouble what I mean is
trouble that doesn't let your engine
fully warm-up you want to make sure that
everything gets up to operating
temperature during all of your trips
especially for those first thousand
miles because you want to make sure that
you break everything in at operating
temperature you want to make sure you
have proper oil flow which is only going
to happen once you get things up to
operating temperature you also want to
make sure that things are expanded to
their final state so that when they're
breaking in for example that cylinder
it's going to expand out and we're down
that cylinder wall and so you want to
make sure it's at its operating
temperature so that everything's in that
expanded state in its warm estate so you
get that proper break in
now that doesn't mean short distance
travel as far as like driving around the
city isn't going to be good it's great
to do that you know driving around the
city you very your engine rpm you very
your load and that's great to do you
just want to make sure that things get
up to operating temperature during each
of your trips while you're breaking in
the vehicle and finally number five you
want to make sure that during those
first thousand miles or whatever it may
be
you're not towing something super heavy
something you know at its total capacity
you may just want to avoid towing in
general there's several reasons for this
first of all it's going to be putting a
higher load on your engine that's
obvious because you've got more weight
and to accelerate you're going to need
more power and so you're going to be
giving it more throttle you want to
avoid those full throttle applications
and so in doing so you know the better
ideas to just not talk for the first
duration now some vehicles are going to
be designed more for than others for
example this crosstrek says it can to
1,500 pounds but you may want to avoid
it entirely because this isn't really a
vehicle setup for towing until you've
reached you know the end of your
break-in period so you're not going full
throttle
now there's two other reasons and that
comes down to your brakes and your tires
while you may not want to talk for those
first few miles
both of these have break-in period your
brakes and your tires and so you may not
have is as good of braking power and you
may not have as good a stopping power as
a result of your tires because you will
have a film essentially from the molding
process of those tires that can be left
on there so you're stopping distance for
the first couple hundred miles of your
vehicle driving your vehicle isn't going
to be as good as it will be later on and
so in an emergency situation when you're
towing where you know you need that
extra stopping power
it's good to wait until you know that
your brakes and your tires are properly
broken in so thank you all for watching
and if you have any questions or
comments feel free to leave them below
    You must  Log in  to get the function.
Tip: Click on the article or the word in the subtitle to get translation quickly!

Loading…

5 Things You Should Never Do In A Brand New Car

222 Folder Collection
噹噹 published on March 11, 2017
More Recommended Videos
  1. 1. Search word

    Select word on the caption to look it up in the dictionary!

  2. 2. Repeat single sentence

    Repeat the same sentence to enhance listening ability

  3. 3. Shortcut

    Shortcut!

  4. 4. Close caption

    Close the English caption

  5. 5. Embed

    Embed the video to your blog

  6. 6. Unfold

    Hide right panel

  1. Listening Quiz

    Listening Quiz!

  1. Click to open your notebook

  1. UrbanDictionary 俚語字典整合查詢。一般字典查詢不到你滿意的解譯,不妨使用「俚語字典」,或許會讓你有滿意的答案喔