Placeholder Image

Subtitles section Play video

  • Hi there, my name's Tom from Vapeclub and today we're going to be taking a quick but

  • relatively in depth look at the new Kanger Subvod starter kit. The starter kit is comprised

  • of the new subvod battery which is a 1300 mAh battery and is non-variable voltage and

  • non variable wattage. With it comes the Kanger Subtank Nano-S Which is a slightly updated

  • version of the original nano and we'll go into the intricacies in a little while as

  • to what that's all about. What does that all mean? Well for those that are new to vaping

  • or just starting out it's a very very straightforward and simple device to use which requires very

  • little knowledge to get a good experience from the device. For those that are more experienced

  • it's a great, stealthy, pocketable, on the go, sub ohm capable device. Simple as.

  • So, let's take a closer look at what you get in the actual box. You get as previously mentioned

  • the Subvod Kit which is comprised of the battery and the nano S. You also get a colour coded

  • USB charging cable depending on which of the 6 colours you choose and some

  • replacement pyrex glass just in case you have an accident for the tank. Avoid you having

  • to buy a whole new kit along with this you get the instruction manual in 2 languages

  • which is as you can see rather basic because there's no need to go into too much detail

  • along with this you get the usual guide to the ratings of coils based on VG content of

  • the liquid you're using and how to verify that it is an authentic kanger product.

  • So we've had a look in the box now just a very brief size comparison we have the Aspire Premium

  • Starter Kit on the left most side the kanger subox nano starter kit in the middle and the

  • subvod on the right

  • In terms of setting the device up the first thing you'd need to do is remove the tank and ensure that your battery is fully charged the way you would do this

  • on this particular device is the usb charger is located on the base of the device some

  • will find that slightly annoying, but it is a pen style vape so standing it up necessarily

  • might not be the way forward when you plug it in you will see that there are 2 small

  • LEDs at the base of the unit which will be red when it needs charge now I actually charge

  • this up earlier it took about 3 hours to charge on a 0.5 amp USB A good thing to do whilst

  • you're charging the battery is to fill the tank earlier on I mentioned that this is the

  • nano-s and is slightly different to the original nano that was released in that it has 4 airflow

  • options as opposed to the 3 that were on the original when disassembling the tank there

  • are 2 portions that can be unscrewed so you want to get a grip there and just make sure

  • you're just taking the bottom off which is what houses the actual coil

  • I'm gonna use some Apple Butter from Liquid State. One of my favourites at the moment

  • I'm not gonna fill it all the way to the top. You'll see here that there is a chimney that comes up

  • essentially you want to ensure that you fill below the chimney line there's also on the

  • nano sort of a metal clasp you can keep it below that if you want it's not massively

  • important for those that want to squeeze as much as they can out of the 1.9ml juice capacity

  • it's also a very good idea to ensure that you prime your coils. The best way of doing this

  • is to just drop a drop into each of the actual juice inlets directly onto the cotton I don't

  • tend to put any in the middle, and once you've done that you can just screw it back down

  • all the way but not overtight and I'd advice you let it sit for at least 5 minutes 10 if

  • possible just so that the liquid soaks in to that coil properly Now we've let the device

  • sit for 5 to 10 minutes, it's time to turn it on doing so is as simple as 5 quick clicks

  • you'll get a flashing light to indicate that you have turned the device on and taking a

  • vape is as simple as holding the button down and drawing on the device

  • I've got it set to the widest airflow setting because I'm using as previously mentioned the stainless

  • steel organic cotton coil which is rated at 0.5 ohms

  • That's a very nice vape

  • And that's basically it in terms of how to set the device up to turn it off it's the same as turning

  • it on 1 2 3 4 5 in quick succession again the device will flash to indicate that you

  • have turned it on or off if you're ever unsure a little tap of the button there's no lights coming on it's off

  • so as I mentioned earlier there are 4 airflow settings it's on the widest

  • at the moment but we have 2 holes 1 which is probably about 2mm and then a smaller one

  • still the last one I should imagine is for those that prefer a mouth to lung vape for

  • those that aren't necessarily sure what I'm talking about what I just did was a direct

  • lung inhale which is typical of a device that is used for sub-ohming. Sub-ohming is anything

  • that is using a coil that is rated below 1 ohm and what that means is that you can push

  • more power through it and get those bigger more dense clouds but for those that are happy

  • with a mouth to lung the smallest airflow setting should be sufficient to achieve

  • a satisfactory mouth to lung vape provided you are using a 1.5ohm coil which you can

  • buy separately and will be available in the new cylindrical form come mid November

  • Pros and cons. Pros. In a word: simplicity for those that are just starting their vaping journey

  • or looking to do so there aren't many devices on the market which are easier to use and

  • require minimal knowledge I wouldn't say no knowledge but minimal knowledge we get a number

  • of questions regarding a number of areas of vaping here at Vapeclub and this device would

  • eliminate virtually all of those other than ease of use form factor is definitely one

  • of the more positive areas you see I just slip it in my pocket no problem at all so

  • again for those that are looking for a secondary device or something they want to use on the

  • go this is a winner

  • The cons: battery life in two words those that are looking to use

  • the device predominantly as a subohm device using the 0.5 ohm coil the battery life lasted

  • me yesterday with relatively heavy levels of vaping around 5 hours as a secondary device

  • that's not necessarily a problem but if you're looking to use this as your main device that

  • may be an issue depending on how frequently you vape along with this there is the 1.9ml

  • capacity of the nano-s on top will mean again if using it as a subohm device you will need

  • to refill the tank on a relatively regular basis lastly the fact that it's non variable

  • may be a deal breaker for some in the fact that fully charged you will get 3.7 volts

  • with the 0.5 ohm is around 28 watts as the charge level drops though, that will drop

  • down to about 3 volts and some may find it doesn't necessarily kick enough as it were

  • so the Kanger Subvod starter kit will be available from around mid november as mentioned it comes

  • in six colours and initially will ship with one 0.5 ohm coil preinstalled and from we

  • understand the 0.5 ohm and the 1.5ohm cylindrical coils will be available in packs of 5 replacement

  • packs from again, mid November and that's about that I've been Tom from Vapeclub, thank

  • you very much for watching if you have any further questions or if there's anything not

  • covered in the video please do feel free to comment I will get back to you likewise feel

  • free to like and subscribe if you like what you see we will be doing more in the future

  • bye for now

Hi there, my name's Tom from Vapeclub and today we're going to be taking a quick but

Subtitles and vocabulary

Click the word to look it up Click the word to find further inforamtion about it

B1 US device nano coil ohm kit starter kit

Kanger Subvod Kit Review & How To Use Guide

  • 65 4
    韓小于 posted on 2016/06/05
Video vocabulary