Name: Toy Learning For Kids with VTech Dinosaur Marble Maze and Marble Races!
Uploaded: 2026-01-24T04:11:46.000Z
Duration: 10 min 44 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

In today's Playhouse video, we're going marbles with our Marble Rush Dino Track.

It has lots of fun pieces like a bucket elevator, a spinning elevator and magnetic zip lines.

And it has three different builds from Easy all the way up to Advanced, which we're gonna try today.

So let's get the box open and get the pieces out so we can start building.

Let's dump it all out so we can see what we're working with.

Now let's find the advanced build in the instructions.

And just like any building project, we'll start with the foundation.

These big foundation pieces have 12 different rows and 1, 2, 3, 4 columns.

And we'll set one more of our 2 by 4s next to the first one.

To match our instructions, we're going to need a lot of two by one pieces.

Alright, now that we have our foundation in place, we can start building our marble maze.

We'll start by placing our spinning elevator piece.

It goes here on the corner of the foundation.

Then we'll top it off with this sign that says T. Rex Dino Thrill Track Set.

We'll need lots of these blue connectors to help move the marbles along the track.

This gray straightaway piece will serve as a bridge from the elevator to the blue connector.

And then we'll use this small orange curved piece to connect the elevator to the other one.

Now let's extend the track further down the foundation.

Another gray straightaway piece will connect the two pieces we just placed.

It'll keep the marbles from going the wrong direction.

That way we can keep the track going the way we want it to.

We can even stack the pieces to give our marble maze more than one level.

And pieces like this twisty curve will help our marbles go from one level to the other.

Now we need to add some more supports to help our second level along.

Since this piece is a semicircle or half a circle, the marbles that go along it will be turned 180 degrees.

It's a magnetic zip line that'll let the marbles zip down the track.

Now we need to add a few more supports so we can extend the track down to the bottom.

And a few more track pieces will help guide our marbles along the way.

It'll Catch the marbles when they're done.

And I have to say, it almost looks like a marble hammock.

And this green curve will make sure that there are two ways to get to it.

Let's make a bit of a tower here so we can put our next piece on top.

That'll send the marbles two different ways.

And it's to catch the marbles and send them into the splitter.

This downward slope will catch the marbles to go this way.

And for the pieces that go to the right, we we have this really cool bucket elevator.

It can use its rotating arms to bring the marbles from the bottom all the way back up to the top.

Now let's build the structure and supports that'll bring the marbles to it.

We'll need to make our pillars two blocks high so that the track can feed into the bucket elevator.

Now that we have the supports, we can fill in the rest of the track pieces here with our orange curve piece, completing the journey.

Now we can work on raising our track a little bit.

Let's add another splitter and top it off with another banana.

Now let's see if we can get our track to loop around so we can get the marbles to come back to the bucket at the end.

This red slide will let the marbles go from the third level to the second.

Next, we'll need a bunch of pillars with our support pieces in place, we can use our track to fill in the gaps.

That'll give our marbles a way to get to the bucket from this side.

And one more for the other side will be your left leg.

If we open and close the dinosaur's mouth, it makes its tail go up and down.

That'll be an important mechanism for our marbles.

Now, don't eat any of the track while we're building.

We'll need to feed our dinosaur some snacks, so this spring loaded marble launcher should do the trick.

And if our aim is good, this launching ramp will help guide the marbles into the dinosaur's mouth.

Now let's connect our launcher to the ramp.

And then use this green curve to feed marbles into our launcher.

This gray corkscrew piece will give the marbles a path down another banana piece.

And this part of the track will be good to go.

Let's Work on getting our track up to the spinning elevator.

Another corkscrew piece will help the marbles travel vertically.

This long piece has its own ridges that slow marbles down as they go along it.

We'll use it to connect our elevator to the rest of the track.

Just a few more pieces and then we'll be ready to rock.

We just need a curved piece here and one more magnetic zip line to connect the two sections of the track.

Alright, now that we built the track, let's jazz it up with a few decals.

All right, now that's what I'm talking about.

Now let's get our track ready for some marbles.

We'll need to prime the spinning elevator by moving the platform down to the bottom.

That way, when a marble triggers it, they'll be spun all the way to the top of the elevator.

Then we can get our dinosaur ready to eat some marbles and finally flip the switch for our bucket elevator.

Alright, now that everything's set up, let's get some marbles.

Our dinosaur must have already got a hold of this red marble because it has claw marks on it.

It looks like it's taken the path straight to the bucket, right into the dinosaur graveyard.

Let's try this yellow marble with a fossilized egg on it to see if it takes a different path.

But it looks like our dinosaur isn't quite ready to give up the marble just yet.

A magnetic marble loaded directly in our launcher.