Name: How are microchips made? - George Zaidan and Sajan Saini
Uploaded: 2025-05-14T00:30:20.000Z
Duration: 5 min 29 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

This is a computer chip, magnified 500 times.

What you're looking at is the top of a computing city, with distinct neighborhoods for different functions.

They're linked by up to a hundred kilometers of ultra-thin copper lines running across ten or more stacked levels.

At the very bottom, billions of electronic devices generate the digital traffic that pulses across the chip.

The most common of these devices is called a transistor.

It's a switch that allows current to flow if it receives a voltage.

Transistors can be as small as 20 nanometers, and more than 50 billion of them can fit on a single chip.

Globally, we produce more than a trillion computer chips every year.

That's about 20 trillion transistors built every second.

And it's done in fewer than 500 fabrication plants, known as fabs.

How do we build so many tiny, intricately connected devices so incredibly fast?

The answer involves a technology called photolithography, which helps us build all the devices on a chip simultaneously.

It's like constructing all the buildings in a city at the same time.

And with no tiny construction crews to help, we build using light as a measuring and sculpting tool.

The process starts with a wafer of silicon, which is doused in solvents and acids to strip it clean before entering a furnace.

Here, oxygen gas reacts with the wafer to form a layer of silicon dioxide.

Then a liquid called photoresist is spun on and baked to harden.

Next, ultraviolet light selectively illuminates the wafer by passing through or reflecting off a specialized mask.

In the lit areas, a reaction weakens the photoresist's chemical bonds.

The wafer is doused in another chemical to wash away that weakened photoresist, leaving an image of the mask.

And an etching machine's reactive gases remove the exposed oxide, creating windows that drill the mask's pattern down to the wafer's surface.

An implanter then accelerates boron or phosphorus ions and slams them into the patterned openings.

These atoms form electropositive or electronegative regions that change silicon's conductivity, creating the foundation of the transistor switch.

The etched oxide windows, however, create hill-and-valley features.

Before the next level of copper lines are added, this one's uneven lines must be polished flat to near-atomic precision using a sophisticated grinding process called chemical-mechanical polishing, or CMP.

CMP uses a controlled slurry of submicron ceramic particles to gently scrape and flatten the bumpy features.

These fab tools, and many others, are used hundreds of times on a wafer to create and link transistors into computing logic gates and to make connected neighborhoods for memory storage and computation.

Fabs run around the clock, and it takes about three months to transform a single wafer from pure silicon into hundreds of chips.

With this continuous operation, fabs consume huge amounts of electricity, water, solvents, acids, bases, process gases, and precious metals.

Wafers are processed in ultra-high-purity tool chambers, maintained by pumps running constantly to sustain a vacuum that resembles deep space.

High-temperature furnaces never turn off.

Fab air handlers constantly expel filtered air to corral dust and tiny particles away from wafers.

The chemicals and purified water used in cleaning create nearly five gallons of waste per wafer run, which needs to be filtered and pH treated.

Meanwhile, CMP slurries are continually flushed with water to keep their fine particles from forming chunks that would tear apart the fragile copper lines.

Fabs plow through vast amounts of nitrogen and helium gas to run their tools.

And other gases used and generated in these tools are greenhouse contributors.

To minimize their emission, machines called scrubbers decompose and dissolve some gaseous byproducts into treatable wastewater.

That uses more electricity and more water.

As computing complexity grows, more copper and precious metals are needed to link up  And new problems arise.

Today, PFAS-based photoresists are essential to make ever-smaller features.

But PFAS waste in the environment is ending up in our bodies.

Computer chips are modern marvels that have transformed our world.

And the factories that build them are themselves engineering wonders.

But as our demand for chips accelerates, their fabrication is hitting hard sustainability limits.

Already, some places are beginning to ration water to farmers in favor of running fabs.

For the sake of the future of computing and our environment, tomorrow's leaner, cleaner, and greener fabs will need to run even smarter than the very chips they build.

Have you ever wondered what exactly makes your smartphone work?

Take a closer look at the precious minerals that go into our phones with this video and find out how we can make this practice more sustainable.