Watch what they're looking to match your outfit or to spice things up for the new season.

Here's how to change your Apple watch band.

Start by placing your apple watch face down on a soft lint free surface.

This will prevent it from getting any scratches.

When changing your watchband.

Here at the top and bottom of the watch, you'll find the band released blends.

If you're just looking to change the size of the watchband, remove the longer half of the band by holding down the release button.

As you're pressing, slide the watchband thio either side in the case that your watchband this stuck or jammed in the connector.

Let go of the release bun.

Press on it again and continue sliding it out.

You add your new band aligning with the band connector of the watch so that the text is facing you and slide it back in.

You should feel a click when the band is properly attached.

Gently tugged the watchband to make sure it's in place to change the watchband entirely.

Repeat the steps with the other half the band.

Lastly, if your watchband still feels out of place.

You may be using one that wasn't intended for your watch sides.

As of today, there are four different sizes for the Apple Watch.

While they all use the same band connector, you won't necessarily get the best fit if the watchband size doesn't match the watch case.

According to Apple, the 38 40 millimeter watch bands are interchangeable, as are 2 42 and 44 millimeter watch bands.

That's it.

You've successfully changed to your Apple Watch band.

Did you find this video helpful?

Comment below and let us know, or, if you know of any alternative methods, share in the comments.