This is made by Max Factory.

This is the 1 70 seconds scale combat armor diagram, anti aircraft pack mounted type.

So I haven't built any of the diagram kids before, but they seem pretty interesting.

They're definitely very unique in the style of them.

And one thing that I like, what this one is that really cool backpack, that it has that kind of the main feature of this particular version of the kid and I love the help for the main box are here.

They have just the picture of the back of the kid.

How often do you see box are where they're just showing, like the back side of the subject of the kid there without showing the front just kind of odd.

But it's a really cool thing because obviously it's highlighting the main feature of it being this really cool backpack.

But in the background of like the main image there, we do have these smaller images where you can see some of the detail shots.

You can see the front of it there.

Uh, what that's gonna look like they're So you have some other front shots here, including, like, in the background.

But just for the main foreground Photo of this.

Just have a photo of the painted kid back, and it looks really awesome.

So this is once again from Max Factory.

Only gonna be the second Max factory kid that I've built a thing after Easter Alexia, which was part of their moderate lines.

So this is gonna be a new experience for me.

Building the diagram kit for the first time and building a non moderate oId max factory.

Kids.

So it should be pretty awesome.

Always like building something unique.

So as always, guys, as we get into the unboxing ends, it was going to have you here for this big thank you to us a good time store for their support.

You guys want to check out the kit for yourself on us again?

Um, store.

I'll have the link to that down below, and you guys can save 10% off that and everything else on the website.

Of course, using the coupon codes are really is 10.

Check that out.

All right.

So the top and bottom of locks just kind of the same thing here.

But in this case, you can see Look at the front side of the diagram there on this side.

Over here, we have a couple of sort of a little more of an action posed.

They're opposed up as much as it can.

Not sure how much articulations things really goingto have.

It's not really going to be doing anything super dynamic.

I don't think we have a couple of details shopped here showing a detail of this weapon there on the shoulder, which looks to be like some sort of missile launcher.

I was gonna say I should also say that I don't have any idea about the source material for this guy's.

So forgive me on that, Uh, the cockpit, which is there on the head, looks like that opens up, cannot be there for that of the cannons over the shoulder and bring those down.

So it looks like they're actually firing straight ahead.

It looks like, and then over here, that's with a different cannon on the back.

So I'm not sure if that's included or if maybe that's from a different game.

Maybe it's just highlighting the fact you can swap back back to the different kids or that is included as an option, which would be pretty cool.

But I'm not sure off hand will have to find out.

Once we get the box opened up going around to the other side, it's formatted like this.

Okay, so we just have a closer up image here of the open head with the pilot sitting inside there and then a nice, big, tall image.

They're pretty much the same thing once on the front of the box, but just showing that they're the backpack once again.

So let's get it open up inside a year.

We just got a bunch of runners, as you might expect.

So make our way through their looks like we're gonna have some holy caps included in here as well and not the most colorful kid.

But it looks like we do have a good amount of different colors in here.

We've got different colors of gray and red and dark green there for some of those parts.

Looks like we're gonna have some water slides in here as well.

Let's take a look at those nice looking waterslides here for this.

You just have some of the larger markings.

Looks like this is for maybe, like the pilot's computer inside the cockpit.

There's that's pretty cool.

Some really nice water sides here for this.

Always nice to see those.

And before we take a look at all the runners, let's just take a look here through the manuals for the front of the manual is basically just the same thing at the front of the box.

On the back of the manual is our parts list Here.

You just got that all laid out there, including the water slides and everything.

We opened it up here.

Looks like we got a little bit of story background about this version of the diagram there as well a couple of like design images there and more information and statistics.

And I'm just getting into the construction so it looks like it's all in color, sort of.

The parts aren't actually in color for the rest of the manuals and color.

That's kind of interesting.

The parts are just there in black and white, so you just go through the construction here, and the back is how to mount back back onto there and then on the last couple pages here, the decal guy, where to place all the decals around kid and then just some different shots.

They're showing some different poses and kind of our color guide over here.

Sort of.

It doesn't look like there is actually an included official color guide for this, but what we do have here some different Aryan.

So here's showing the main color variant, which we have on all of the box are then down here doing some different color variations here.

Grey, green, mahogany, dark green and light grace.

It's a different collaboration that you can make of this.

That's pretty awesome.

Josie, you seem different examples there in the manual like that over.

Now, let's take a look at through all the runners like it that we do have some Polly caps here.

This is PC one in black.

We've got two of this runner and then we also got PC to for some more poly caps here in black as well.

A here going to be in a little bit darker, great color, and you kind of start to get a sense of the scale of this.

Looks like it's gonna be generally about the size of, like, a small master grade.

It looks like I'm gonna be here as well.

Also in that main dark gray color which seems to be it's gonna be the main color for the armor for this this one.

Also, we have two of this.

Be Runner.

See here in a little bit lighter grace lightly.

This is gonna be something different hand parts in some different detail.

Part seriously.

We're gonna have some different options for the hands.

It looks like I never heard Ian a light gray color here.

We got some parts for the cannons for backpack.

Also looks like some guy parts and from their detailed parts around on the body, the same thing here for runner E Just some of the lighter detail parts.

We've got two of this.

E Runner for F is just this one single piece here for the pilot figure.

Org here is getting into smaller detail parts and backpack parts here and this very dark green color and runner H as well also in that same dark green color.

And we've got two of this h runner when I have some of the detail parts in this nice color of Red Bernard J is our clear parts for this.

You can see we have some different options on these and also on here.

We have a little bit of pre painting.

These parts are in that kind of dark, smoky, clear.

Obviously, we can see on this one part.

They're down there on the corner, has a little bit of pre painting of some dark gray, and they're gonna be kind of hard to see on camera and even hard to see in person.

But it looks like, as far as I can tell, that it does have some pre painting on it.

Same thing goes for this other part for the canopy over here.

As you can see, the canopy on the far left over there has some pre painting around.

Just for that words, the other options don't see if you wanted to paint that yourself, you could do that.

But if you didn't want to, you've already got that pre painted for you there on that one parts.

That's pretty nice, But okay, here is a couple more parts in red.

And then finally, runner l here, as you can see, is just going to be the main parts for the backpack and the different cannon parts on there as well, and was quickly take a look back at the manual.

And now that we've looked through the runners, it looks like it does give you the parts to make two different versions of the backpack here.

So it has the turbo sac, which is the main back back there with just the one single longer cannon.

And you have the and armed anti aircraft type sac, which is the one that's pictured all around on the box with the two candidacy will have the option.

What, you want to use that one or just the longer single cannon like that's That's pretty awesome that you have the option include with this anyway.

So I'm gonna go ahead and get this all built up put together, and we'll take a look at the kid how it looks just straight out the box.

All right, so here is how the kid is gonna look when it all comes together.

And if you guys didn't watch the live stream build of this, you can go back and watch that streamed.

The building process of this, it was a pretty interesting building process.

Ultimately it came together a little bit smaller than I was expecting for one of Other than that, it's all pretty much as I expected, the construction not perfect.

There was definitely a good amount of sea mines on there, which I'll point out here in a bit, but some nice detail here and there as well and just overall, not going to be like the best to build quality compared to something like Ben dies putting out in the same day and age.

But what?

This gate, you can definitely see that with a little bit of love, it could look really cool.

And it's basically just the style of the kids.

What, you what you want out of this kid?

You're not buying this kid for so amazing feats of engineering going into the kid.

I think it's just that you like the style you like the look of it, and so that's what you're gonna be getting with.

This.

It takes is gonna take a little bit of work to get it really looking its best, no doubt about that, but there's definitely a lot of charm to it, and it makes for a pretty cool kid in that sense.

So let's take a closer look at it and I'll show you guys some of the finer details option parts, things like that.

All right, so in the head, you can see you got the clear part here for the canopy.

Also a clear part for that camera lens, which is one single party can see through the front and the back there of the head.

And we've got three different options for the canopy.

So this is the option that has the pre painting around the edges of that.

So it's kind of nice that you don't have to worry about painting that part.

You've got kind of tinted clear there.

It's in like a clear black.

And so you got that, but you will be able to see the num mark a little bit There.

You can see the look on around lower edge of the canopy there, so the pre painting is nice, but it's not perfect cause there's a number right in the middle of that.

Now there's two options for how you want to construct the head here.

With this option, you have a poly cap in there, which will allow you to open this up like that.

Open it up.

You can see our pilot figure is in there.

You're meant to glue it in place.

I haven't yet, so it's a little bit loose in there at the moment.

But you can open this up and there's this also this hatch here at the top, it's kind of hard to get and it's not really on a hinge.

Buzz just on those two little pigs.

Their secret just obviously completely remove this like that, or you just pop that out and then just place it back and, for example, this position like this.

So you just have that little single part opened up like that in our other option for the canopy there is using this piece here, which is your colleague kind of control panel inside there that doesn't use the Pali capital has this fixed piece here, and you have two options for the canopy.

Now, neither of these have the pre painting.

This one is just one solid piece.

This one does also have the separate hatch there on the top.

But what these?

They'll just be fixed post.

They don't have the articulation.

So this is just It will be a fixed post open one like that, and other version here would just be a fixed pose, just like slightly open like that.

So these just if you wanted to have it open and fixed like that, you don't want to have probably kept you will have to do the painting around the edges of that, though ahead itself.

We'll just be able to rotate there as it is.

Just plug down into the body and then also these little bits here on the side, little cannons or whatever.

Those may be smoke launchers or something like that, Uh, can also rotate up and down there, just plugged onto a poly cap peg to straight there, into the side of the head.

Now you do all seven option for that.

You can replace this one here on this side with what would be against our kind of tube missile launcher or something like that that's just plugs onto the side of the head there like that.

That's also pretty cool option that you have there.

Then the torso and the waste upload together.

Be a bold guy in there, so you could move that around a little bit forward and back, side to side a little bit.