Name: HGUC Gundam TR-1 Hazel Custom (Review)
Uploaded: 2020-03-18T10:20:54.000Z
Duration: 10 min 57 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

This is gonna be my auto box review here for the HD.

And I've got to say, despite the fact that this came out, this kid originally came out in 2005.

Uh, this version of it does seem so much better.

I don't know, as you guys may already seen in the past, I have reviewed the advanced Hazel kids, and that was like the original version of that where had the baby s joints in it?

And this one Now that all the joint parts, all the great parts have been replaced, they're no longer in a B s possible.

They're just in regular KPs polystyrene plastic.

The kid feels so much more solid, and it really doesn't feel as dated as I think it did before.

So, like, if you're the kind of person that maybe have has built this kit, you know, 56789 10 years ago, then you know, building this one now today.

Now that it's been, you know, reprinted with the blue label honest.

So make sure if you want to get one, make sure you get one with blue label in the updated plastic for it feels so much better.

So anyway, that said, of course, the actual molding of the kid has not changed.

Also, there are still definitely some pros and cons with it.

We'll go through all of the and the accessories, but, of course, huge Think it's us again in store for their support for sponsoring this case.

We'll check out the link to their site down below and use that coupon code there.

Here is, of course, the marking sticker sheet.

As you can see, I used a good amount of them, but there's still a few left, some kind of generic caution markings and a whole bunch of Titans test team logos.

They're still left, but I did place some of them around here on the kids.

Ah, lot of them don't really fit quite right onto the space.

So what I actually had to do especially like for this one here, the big rabbit logo there is any time like the sticker was like going over the edge of a part or like going up over the edge of there is I just sliced it really carefully with my knife.

That's just I mean, I just put these stickers on just for the sake of the review.

But as long as they're on this, like off white plastic, they look fine.

Anything on like the darker colors is probably not going to look as good as for hand options.

It's a bit of a mixed bag because here's what we've got.

We've got a trigger finger hand over here for holding the rifle.

Our other option is for holding the beams there.

We got a beam saber, a specific holding hands, and both of them do look pretty nice on the other side.

We've got an open hand for the left hand, which is nice.

One thing that I don't really care for a lot with the most high grades is that usually what you get with high grades is just to kind of standard holding hands, and that's it.

So the fact that this has three hands is nice and the fact that has an open hand for the left hand it is nice to you can use it as, like, a rifle support hand or just for like, just resting down there like that.

I will complain slightly about no other option for the right hand.

If you didn't want to have it holding any weapons, you've only got weapon holding hands.

And so if you want to just have an open hand or closed fist or something like that, you're gonna have to look elsewhere.

Then we got these little option parts here for the top of the tour.

So there you got those yellow bits, handles that fold out.

You can use thes, I believe, just little missiles instead.

Of course, we just have the regular beam rifle here.

There's no sticker for the camera on that.

And it's all just molded in this dark blue color.

The best really would've been nice if this was just molded with the great runner, I think would have looked a lot better.

That leaves a little bit to desire the details, all there.

Secondary handle on that does move up and down, but it can't move all the way straight down.

Strangely enough, so you just kind of have to keep that out to the side.

Their effect part here for the sabre handle, which is stored up in the backpack that just pulls out of there like that.

Then we've got the standard shield here, which again, as you can see, the sticker on the dark plastic not looking as well, especially on this curb.

Service doesn't really want to lay flat on there, but otherwise I mean, the design of the shield is cool.

You have a connector here which will allow you to plug the onto either decide or the back of the forearm.

This plug's onto here on the back of the arm like that.

Our other option, however, is the booster shield here, which is pretty cool.

You have a nice color separation with yellow parts in there.

This one just connects onto the arm the same way.

But this one also has this little pig here which will fold out to allow you to plug this onto his back as well.

The pod on his back here it will extend out, and you can fool that back like so Plug this into there.

Now he's ready for a cruising along there at high speed.

So that is just if you didn't want to have it come down to the Army, However, if you did want, just want tacked onto the Army can do that as well.

Unfortunately, we only have one connector, so you can't plug one until the left side of one to the right side, which really would have been nice.

And you also can't plug them onto the same connector, both at the same time.

It's just not going to work on there, so you can't use both shields on the arms at the same time.

The other disappointing thing about this case that there's no hole for politeness onto an action based.

Now all you need is just a three millimeter drill to just drill hole into there, and then you can plug it onto whatever action based.

But in the meantime, you have to use one of the fork adapters.

But first, let's just take a look at some of the articulation here, but I guess before that I should just mention about the foil stickers as well.

We've got a florist over there for the eyes, this one on the top of the head that wraps all the way across the top of the head.

Their background here on the backpack, this green oil sticker there and then on the front of the legs to more green forest occurs.

There's not a whole lot in the way of stickers, but there are still a lot of little color APS missing from this kid, little bit inside events and all this kind of stuff.

So you will still have to do good amount of painting if you want it to be looking accurate to its correct colors anyway.

So let's talk about some the articulation so the head will go all the way up to there, which is pretty good.

Look there and then down to their no big deal rotation.

Not a problem as well as for the shoulders.

Those will extend forward to about there.

You do have a seam line across the top of the shoulder there, with it being in 2005.

There is afforded back motion of the shoulders.

You got a little bit of that shoulder will move on its own up and down, but not really so much up.

It's just kind of blocked in there, so you can't really do a whole lot with that.

Ultimately, can only bring the arm up to about 90 degrees.

Otherwise, the arm will just work normally.

Rotation here at the top, double joint at the elbow, which is really nice.

And then just bald right here for the wrist.

Subtitles ListPlay Video

HGUC Gundam TR-1 Hazel Custom (Review)

expect

solid

amount

extent