Name: Universal Unit Gundam NT-1 ALEX [Chobam Armor Set] Review
Uploaded: 2020-03-14T06:01:23.000Z
Duration: 11 min 28 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

So for today's video got something kind of simple?

Adverbs of degree

We're just gonna take a look here at this universal unit figure.

So I just wanted to check this out with you guys, just as a simple review of Universal Unit Kid.

Just that you guys, if you're like me and you've never had one of these before, at least you can have an idea what the line is like, what you can expect from a just typical standard Universal Unit kids.

So there are some one like the X Series one.

I think they are just like them, or, like, larger, one more complex ones.

But they all should be generally around the same quality and around the same kind of details.

So, anyway, this one is of the Alex, and it does include the Children, armor and everything for that as well.

This is, I believe, from Siri's, too, of the university unit line.

But just in case, I'm not sure exactly on that, but is this series of this particular Siri's does include two different versions of the Ark 70.

It's too, are accepting zero to kind of the origin version of that.

Also, the origin version of Shar Czako, too, is there's two different versions of that.

Two different versions of the Alex one with the rifle on the steel going with total warmer.

This is along with each other murmur and then two different versions of the gun of Barbato says.

Well, one looks to be like the fourth form and want to be the third form.

So one with the shoulders from the Greys and Big Mace and the fourth form being one with the massive, smooth bore cannon there for that.

I mean, there's a lot of figures in this line that have looked interesting for me that I have thought about checking out.

But the thing that has been kind of the thing that I didn't really particularly like about the designs is just what I've seen of the construction and just of them.

The details don't look super sharp, and the pre painting on them doesn't look that good, and also it seems like they have a lot of hard points on them, typically which I don't really care for.

At least at first glance, a lot of the assault kingdom figure.

So it's gonna be a typically, like, basically very similar to the assault kingdom line.

Then that's pretty cool, because the articulation of those at least, was really nice.

So they made for a really cool little figures.

Well, maybe not like the best details are the best pre painting on them.

They pose really nicely, and they're pretty interesting.

We've got some of the armor parts over here got the beef in.

We've got the main body, the backpack and the waste section there.

It looks like your hands anyway, there as well.

Seymour of the film armor and then in the other bag.

I've got some more white parts there for the body.

The arms, shoulders, legs, defeats, the arms, the feet.

And then we have some stickers included as well, actually, so that's kind of interesting.

You can see we've got the Alex logo on there the U.

N T Spacey logo and then some of the little color correcting stickers on this it looks like So the instructions for building this are actually printed here on the inside of the box.

I figure it's not gonna be all that complicated, but together probably don't really need that in this case.

But I'm gonna go ahead and just get this all put together then and we'll see how it looks.

All right, in here is how it's gonna look just snapped up together and with the stickers on there.

So you got little red stickers for the knees.

Got a little black sticker for the front of the crotch.

A couple little red stickers for the cockpit hatches and stickers on the front of the shoulders.

So you also have the yellow stickers on the events on the size of the legs as well, and the stickers that will mention about the stickers.

They don't seem the same quality as like the foil stickers you get with, like your gun for a normal gum.

They didn't stick quite as well a couple times like it's stuck the sticker on their first.

And if you'll just flew away, I had to find it again.

So they're not like the kind of stickers you normally get with the normal kids that, like, if you stick it down, it's stuck on there.

Well, just make sure you press the stickers down really well, if you're gonna use them for these particular kid seems like.

But otherwise I mean, it doesn't look too bad.

It definitely could use some pen aligning some detail painting on there just to help bring out the details.

It was just kind of white areas, details, a little bit kind of lost in there, especially around the face.

So even if you're not going to, like, repaint the figure or anything like that, I would say definitely give this some pen align, wash to just make it look a little bit better.

They were taking a look at it here and now.

At first, without all the trouble Marmor attached onto that will put all that on in a second.

And so without the shield without the rifle, you know, just in the basic form like this is gonna be looking a little bit playing without that stuff.

You do have the Gatling guns for in the arms that will take a look at those here in a second as well.

Let's take a closer look here to check out some of the articulations.

Very stiff ball joint, but that will give you some nice up and down movement there at the neck.

Anyway, the shoulder armor is just kind of plug onto this straight peg which just comes out of the body there so that peg doesn't move at all.

You are able to bring the arm up a little bit over 90 degrees.

And then Ford back Obviously not gonna be a problem, except I think I just lost that shoulder armor will get back to that in a moment.

Then we have some rotation there at the top of the arm and then the bend at the elbow.

That looks like it's gonna give you more than I degrees.

The wrist is just on the peg so you can just rotate that around there again.

Kind of very stiff, Little bit, hard to do.

But here, on the back of the arm, is where you can remove this blue part, and they've got these little machine gun bits here in the back of the arm.

Just pop that in and put the blue piece back and on top of that, and so it's gonna look all right.

But as you can see, you're gonna want to drill out the holes there for the barrels because there's no actual like barrel holes there at the end of that.

But the detail and it does look kind of all right.

You also noticed, too, that the inside of that blue part is not blue because that's actually just a white plastic piece with some blue paint sprayed over the top of it.

And there's no blue paint sprayed on the underside of that.

So you might want to just go ahead and like painting the underside of this part in greater sum like that, too.

Maybe match this dark, great part of the machine gun bit.

These front skirts will move up and down a little bit.

They seem to be joined together here, As you can see, I guess which we just remove this part of the front.

Say the front skirts are joined together.

You're not gonna want to cut those parks.

It looks like they will fall apart if they're not attached to each other.