You see mobile suits, second V So this is a variation of the Victory Gundam.

And if you saw the on boxing is basically a mix that's about half a totally new parts for this, and then the other half is made up of a mix of parts from the victory gonna end the V two.

So there's a bunch of stuff in there, and it all makes for a really pretty awesome kids.

If you watched my life build of this, he saw, I was really enjoying just just kind of pointing out the fact that there's a lot of really great color separation in here.

It is a little bit sticker heavy.

There's a there's a handful of stickers there.

It is an HD, so that's not entirely surprising.

But it does have a lot of really great color separation in there as well, so it's kind of a mixed bag.

I think just the general size of this being a very small amount of stickers that it does have is not that surprising.

And a lot of the stickers are kind of inconsequential, but they're not really particular necessary.

Especially you're gonna be painting.

They're very easy things to just paint in by herself.

Where are all the kid does feel really good.

I like it quite a lot.

A few years back now I built the V two assault buster, and I really liked that kid as well.

Definitely prefer the H G line of victory kits compared to the master grade of our cause.

But with this one being a p van dyke, it's probably going to end up costing you around as much as a master grade anyway.

So let's get in to talk about the accessories, everything that you get included with this Get first, we'll go over some of the articulation, all that I give you my final opinions on itself.

And so the first thing we'll take a look at here is the sticker sheets.

So as Cassie, I've used all of them, except for a couple of these black ones.

Here, go here on the head.

You can see in the events on the side of the face was a red inside because they're part of the same red piece of plastic that makes up the red under the chin and then the red under the eyes.

That's all one red piece.

But just to make those side vents in the side, it had black instead of red.

You have these stickers for that which I honestly just forgot to put them on, and they didn't want to take the head apart again to put them back in.

But you guys don't really particularly.

That's a very small detail, but you get the idea.

And then for the eyes, you have two different options for the ice.

So, like I said, there's a red piece in there so you can see a little bit of red underneath the eyes.

If you want to make that really super apparent, you can use this detail, which includes a little bit of red on the underside of the ice.

Otherwise, the isa is exactly the same.

Just that the piece of plastic is red, so you don't really particularly need that sticker.

But the rest of the stickers here artists on here for the head camera, of course, in the front and on the back, and they're these red circles going around on all of here, which I found didn't really go on very well.

They don't really fit on particularly well.

And they're kind of odd, awkward and then on the forearms.

You ever aside from the red circle, have in a little red strip that fits around like the top of that part there, which again doesn't really fit on super.

Well, as you can see, there's a little crack there.

They were just usually Benedetti stickers work super well.

They fit really tight, but he's only just found.

They just weren't exactly quite right.

Anyway, same thing with these here on the shoulders of these black ones that fit inside the events here on the shoulders again.

Very easy.

Just paint in that detail yourself.

And then we have a black sticker in here for the end of the Canadas to make it look like so that that's actually hollow.

But it's actually just only goes that deep.

There, in the last couple stickers are here on the beam rifles.

Let's take a look at that.

You have to blue decals there for the top and then for inside there for the cameras on the beam rifle so really awesome being rifle here.

I like this Be to version of the beam rifle of the bowl.

Curious as this parking at the bottom as well.

You can remove that if you want.

It's just this kind of standard looking, one less bulk.

But I, like this added, are onto their.

But only promises has got these hello gaps in the back of it like that, which are a little bit unsightly.

They've also got are two beams, sabers and clear pink effect parts for that which look really nice because they're different.

Effect parts from just the standard ones.

How they have this extra bit of flair there at the enemies are also in harder plastics.

That's just kind of standard clear plastic that, rather than the little bit softer plastic usually see for being effect parts.

Then we also have one of the beam fan as well suggests, Wants that out.

He wanted to create the signature of victory, gonna beam fan effect there as well, so that's pretty cool looking also, we do also have the beam shield, which will plug onto the back of the arm.

It's a really awkward shield.

One aspect of it is a victory.

Gonna move was never really cared for.

But that does also come with the kid here.

And the last thing is just an option part for the shield.

So that is up here, over the shoulder.

So it has to different parts of the parts up.

These if you want to have it in the store to condition or this one is for if you want to have it in the deploy to condition yellow with the deployed condition, obviously you can see this will plug onto the back of the arm where this red part folds out like that.

That is also a new part for this little bit different than what comes with the original Victory Gundam.

That cat pops out and you can plug this on in its place there just like that, which should work pretty cool.

Alternatively, if you're using the beam shield to plug the cap into that and then plug this onto the back of the arm here and again, just due to the design of that, it's pretty odd looking like you look at it from the front like this.

It gets kind of convincing, but if you want to have that down it looks a bit odd, but it's on the end of that big red parts to keep out of the back of the arm like that.

So never really been a too big fan of that design.

Now, with this being a kid that really cycles parts from previous kids, we do have a handful of leftover parts, none of them really to worth any, except for the fact that we have two of the beef in and which is really good because it's a really fine, detailed parts and very thin and I think could be very easily breakable.

So it's nice that we have an extra one just in case you break one, you've got the extra one, just in case you can use that.

If you need some, definitely hang on to that.

Then, for now, let's just talk a little about the articulation of this so the head will go up to about.

They're just not too bad.

Good for a nice flying post like that, and then down all the way down to there.

And once again, I just point out some of the color separation here.

Aside from the close separation there in the head, which is really nice.

You have this close separation here in these vents in the front of the chest.

That's the blue part behind there, poking through the white parts.

You have this great part booking through the white parts there on the backpack, these air separate parts here.

No stickers, no stickers.

Here you have the great parts poking through that little red part there for the cockpit hatch is, of course, the yellow events inside there as well.

And then up around here on the candidates, a nice color separation with the gray bits poking out here, here and here.

All of that for the cannon here on this side there as well.

So it's really cool.

Nice color separation on a lot of these parts.

Through looks really nice.

But back to the articulations, though, the torso will go back and forth a little bit like that at the mid section and then side to side a little bit there as well and some rotation as well as for the shoulders.

You have the holy capital which will swing out to the front a little bit like so pressed all the way and should be kind of like that, the shoulder well, ally, to bring the arm up to just about 90 degrees.

And that's about it.

So that is the extent of the upper movement of that.

But as usual, the arm will just rotate there at the top.

We have our double double joint there in the elbow for a pretty nice full band upwards.

Like that hand is just on a ball joint.

And just in case you didn't figure it out already these holding hands of the only handle you have included with this kid which I will mention as I mentioned during the live stream and that I think the hands on this look a little bit larger than they really should be.

So definitely if you have some option hands just to get a little bit smaller hands for this, that would probably be a good idea.

Seems like that would make sense to me.

But fencing on depends on what you guys think of the kid, of course, moving down to the skirts thes front two are just joined together those and move up and down like so, no problems with that.

These side skirts can also move up just a little bit like that.

Back skirt doesn't move it all but against a nice color separation with the great events up inside there, that looks pretty nice.

The hip joint can rock side to side there as well.

And then you have just a little bit of rotation there at the top, not full rotation.

Will you get that out to like, 90 degrees, which is definitely more than you would ever needed to move and then horizontally they can come out to about that far for a pretty nice spread forward.

They should have no problem coming all the way up to the front of the knee is gonna crash into that front score armor literally every conceding good.

At least up to 90 degrees.

If you bend the knee out of the way, you get the leg up just a little bit more like that.

The knee is gonna have a double joint, which is pretty essential because the design of victory has this big bump out the back of a fight like that which could get in the way.

But the way this is designed, you got a pretty nice Ben out of that.

So that's good down here at the ankles.

This little bit does move a little bit there.

The foot forward just doesn't come really all that much for up to t about there.

But you get it pointed down pretty far in the news again, see of a ah, separation of the Tosa can actually fooled the toe back like that, which is pretty nice and then up beneath the feet of some pretty full detail.

Just a little bit of hello, Gap up in there as well.

But overall, it's pretty nice, I think.

Then just going around to the back pack, of course.

And these bits here will open up like that.

Someone asked her in live stream If this can use the wing of light, affect parts with this, I would believe so because it looks like it has a connection points in there for using the wing of light effect parts with this.

So it should work as far as I know if you guys know anything different than they were coming down below.

But those just open up like so and the cannon and the shield are also on, like the same kind of articulated arm here for that.

So you have a couple of points of articulation here, a ball joint at the base and then a rotating joint up here as well, so that can bend around and bend here at the centre as well.

And then you have a point of articulation up here as well, and you can actually take this off of here.

And then you can hold this cannon in the arm just by holding onto the handle here like that.

So it's kind of men for the left side, but I guess you could hold on the right side as well.

We're just gonna be upside down.

But it's meant to be on the right side, on the left hand like basket, just holding the handle.

This is the part which flows onto the back back.

Just pull that back out of the way.

And the shield, of course, as well can also be removed from the backpack like that.

And then you'll have to part swap these parts for the deployed form.

But you just kind of remove each of these bits off of here, plugged them onto the new peace, and that is how the deployed its shield is gonna look so also really cool design for that as well.

Can take off each of these three parts to fly around on their own.

You have to put them on some sort of standard something.

Obviously, nothing's included for that effect parts for this or anything, but it looks like inside each of those who just got the kind of standard peg adaptor there.

So if you had just some sort of like a clear rod or something, you just plug that up into their already as it is.

And I was like, You should be able to just set those flying by ourselves without even having to drill the hole by yourself, which is nice just for comparison.

As you guys all know, the victory gun, um, is a pretty small boy.

So here he is, compared to us, you're a standard size H g the Ark 72.

And so really, that makes that extra little bit of color separation.

And they're on some of those really tiny parts all the more impressive just to see that in such a small scale like this for this tiny HD, but really impressive.

So I got to say this makes for a pretty nice solid H G kits.

Got a few stickers on There may be a few more than you might nor like to normally see, but essentially, they're just kind of necessary really wish that those red circles would be just kind of separate parts in there.

But honestly, not that surprising that they aren't so.

It's just kind of expectations.

You can't expect everything on HD to be perfectly colors separated.

The fact that I had some stickers is just sort of gonna be a fact of life over all.

The seam lines on this get also very well handle is that pretty much doesn't have any sea mines on it that are really all that noticed with me on the head butt, even that one.