Placeholder Image

Subtitles section Play video

  • How's going, guys?

  • It is here.

  • The master grade Gundam Barbato.

  • So this kid I've got to say is pretty amazing.

  • I should also preface this by just saying that I wasn't the biggest fan of the arm blood orphans, Siri's or like the designs that much in general.

  • But despite that, this is a really super nice master grade that I can highly recommend to you guys.

  • So is pretty awesome.

  • If you guys didn't see the live stream, you go back and check that out and live streamed the build process for this, you can go back and watch that it was a really fun build and the lifestyle was pretty fun is what we have a quiz and give away.

  • So that's all sorted.

  • And that was a lot of fun.

  • I shared a lot of my thoughts on the building process all throughout the live stream as well, so it's worth checking out if you're interested.

  • But for now, let's talk about my final thoughts about the kid, not have it all built up and ready to share this with you guys.

  • And so as we get into it, as always, a big thing you two s a Gundam store for their support.

  • If you want to check out this kit or anything else, they're on their side.

  • The link to us a gun store be down below in the better description.

  • Go there, check it out.

  • You can save 10% off everything.

  • Using the coupon code, There's aka Really is 10.

  • Let's get into a here with the master Great Varvatos.

  • It's amazing, and I can't wait to show it to you guys.

  • So let's check out the articulation.

  • All the finer details first, right?

  • So aside from the articulation, also just point out some of the finer points of the build little gimmicks and things like that as well.

  • Now as I said, the process of building this was quite complicated.

  • It's a pretty complex built, especially a lot of the frame, so it's definitely definitely much different from building the non grade, 100 scale kid.

  • I expected to be, you know, kind of relatively similar, but it's not very similar to that all building the frame of this takes some time.

  • You really have to pay attention to what you're doing in the manual coast.

  • It's just pretty complex, so whole time building.

  • I kept coming back to that thought, thinking like men, this is a pretty intricate build.

  • So as you can see, I mean, there's just a part of separation and details everywhere.

  • A lot of parts of the armor, like you see heavy some big open areas where there's not a whole lot of detail on the outside armor.

  • But there's a good amount just here and there, but especially on the frame, any parts of the frame, even parts that end up getting covered up.

  • There's a ton of detail in the frame.

  • So definitely this is one like where you're gonna want to do.

  • If you're gonna be painting it up, you're gonna want to do probably just as much work detail ing up everything on the frame as even the outer armor as well.

  • So it's a really cool frame to build up.

  • You got a ton of pistons everywhere, as you can see.

  • Just a little silver bid to go pistons up here in the arm.

  • You got business on the back of the arm in the back there on the back of the legs down here, and so you've got plenty of really nice little details, those bits all in the plated silver and then here for the eyes.

  • It's a clear Greenpeace.

  • You do have these foil stickers you can stick on there instead if you prefer.

  • But I just thought I just want to show you guys the clear green part there for the eyes.

  • As far as the articulation for the head, you've got a joint at the kind of base of the neck that will move like that.

  • Then you've got a joint in the base of the head as well, which also, if you kind of shoot me that around, you can get that up to all the way up to there, which is pretty awesome for the neck joint.

  • You can see you just got a bunch of the inner detail.

  • They're exposed there at the neck as well.

  • And so far, upward movement.

  • This thing is pretty amazing.

  • There and against all the color separation parts operation there in the face is amazing.

  • The cockpit hatch does open by sliding this down just a little bit.

  • It's a little bit tricky because the gold apart underneath this blue park tends to kind of get stuck there a little bit, but that opens up and you can see down into there.

  • You have your seated me Kazuki pilot figure inside.

  • There's really only see, like the top of his head.

  • But he's in there, as you can see, and so that does just open up a little bit like that anyway.

  • Then the head will go, then all the way down to their like cells.

  • The neck articulation fantastic.

  • Here in the torso section, you've gotten kind of two points of articulation here at the base where, like the center, part of the torso connects to the top half.

  • And so you can see as he moved that up and down, the Pistons will move, and you can move this side to side rotating like that, also kind of this side to side movement.

  • The Pistons will move a little bit like that as you rotate that kind of off to the side at an angle.

  • Then we do also have another point of articulation.

  • For once, you've got this kind of all the way forward at the lower point.

  • Then there's another upper point above that for further Ben, for a kind of it's more like the front.

  • It's kind of authority as far forward as it's gonna go.

  • But you could bring the back up a little bit more, and there's a little piston up inside there as well for that for bringing the back up just a little bit more, even farther forward.

  • So the stomach crunch is pretty intense, and you can also move that back a little bit back Thio there as well.

  • It's gonna be a little tricky to shaving, like the turbines of the AI have reactor.

  • Those bits up in here, those will just spin.

  • They're not connected anything.

  • They're just separate part that it spins freely up inside there.

  • So I can't really do a whole lot really with that.

  • But it's just a cool gimmick that they built into it, that those can actually spin like that.

  • And then the shoulder is okay.

  • You've got two Pistons here, which will be exposed when you move the shoulders out like that.

  • You can see one connecting towards the back of the torso and one connecting top of torso.

  • Here.

  • Both of those get exposed.

  • When you rotate the shoulder forward, it looks awesome.

  • So shoulder ultimately will come forward to about there.

  • The armor will move up and down on its own kind of similar to the one on scale in HD, but it's connected a little bit better way, so it's actually a little bit stronger connection in this case.

  • And now, from when the kid was first announced, I had doubts about this seam line here on the side of the shoulder.

  • It seems like they've changed up a little bit.

  • They've made this groove so that it makes it's like a really super wide panel line, like a one and 1/2 for 1.2 millimeters.

  • It looks like they're so they've hit in this seam line here on the shoulders as just really wide panel line.

  • So that's okay.

  • And the clear pink parts here look fantastic.

  • Now, here on the shoulder, it looks much brighter because the part underneath is white here, on the chest and on the knees.

  • It's not as a parent still looks cool, but it's not quite as a parent without a white backing both of these air to set against the dark frames, so they're not quite glowing as brightly.

  • But here, at least on the shoulders with the white part behind it.

  • That looks really nice, but I just love the fact that used to clear parts for those that looked really good.

  • But anyway, even with the shoulder armor up another way, you can still only bring the arm up to a little bit kind of more than 90 degrees here before you starting to pop off the shoulder armor stuff upward movement of the arm is still going to be a little bit limited.

  • While we're here, I'll just point out to you can see even up inside this yellow part.

  • You've got some detail in there like little Hoes, and Ben details up on the inside of this yellow part here.

  • So again, this is a kind of kit, and I'll just keep coming back to this point that once it's fully painted up and you really bring out all the little details here and there and everywhere on this kid, it's gonna look absolutely fantastic.

  • Even if you're not the kind of person that goes in and adds, like describing and custom panel lining and custom details on the gate, you really don't need to do a whole lot of that on this or any of that to really have a super detail looking kid once it's all fully painted at me.

  • Just paint up and accentuate all the details that are already here, existing on the kid, and it's gonna look super detailed.

  • And while we're on that, no.

  • Although just mention this up inside the yellow parts there behind the yellow part just the white part back in there, which you can kind of barely see.

  • There's even vent detail up inside there, behind the yellow events on the front of the chest, there as well.

  • Even pretty amazing.

  • But here for the arms have got some rotation there at the top and his elbow joint, which is pretty amazing here as well.

  • So you can see when you bend that you have a separation with this middle part of the elbow and also the ones getting pissed in there at the back that will separate that for a really nice full bend there and then take a look at that one more time here from the front because here on the front, there's the two separate little white pieces in the upper one will go up underneath this one here.

  • When you pull that up, that little piece will disappear up underneath that armor bit to really get the full extent of that, Ben.

  • And what's more, this part here for the hoses on the back of the arm?

  • It's also think it's easier to show if I take the arm off the Cabo once that's losing into those air hanging a little bit loose, if that's just in a straight post.

  • But when you bend that those tubes on the back, the arm get pulled up into there, so is once again, if you can see that, it's just little details like that of the articulation that just make this pretty amazing and then ask for the wrists while we're here.

  • The wrist is on a him, so you can not only just rotate that on the peg, but there's also a Ford and back hinge.

  • Here.

  • Thumb is just on a Baldwin, and the fingers are just the swappable type.

  • So we have said the fingers for close fists as well as a set of fingers for holding hands, and these have grooves in there to slot into the grooves on the weapons for a nice, solid grip, and we also have a set of just open, expressive fingers here as well to have open hands now, these open hand are these different hand options are really great in the details on them all look really nice as well.

  • The only thing I don't really like about the thumb is that even with the closest, the thumb doesn't quite rest down all the way.

  • So it's still kind of looks like his thumb is still just kind of sticking out in a weird way, even when he's got the closed fist like that.

  • So if you're looking at it from the right angle, you don't really notice.

  • But if you look at it from the wrong angle, it looks a little bit goofy.

  • But all right.

  • Now, back to the skirt bits, so the waist section is pretty normal.

  • It's not a whole lot, really to special exciting going on with this.

  • The fronts good start is connected on bold joints, and those come lift up.

  • You got not really a whole lot of detail up underneath there, but from the front they look good and they're not really in the way of anything.

  • So those look nice side skirts as well.

  • We'll move up and down, and then those can also rotate Ford and back.

  • But otherwise again, just not really gonna be anything too special.

  • It's really no here, just again, some nice detail all around for those back skirts earned on Baldwin's, where they were just on peg, seek and rotate those up and down like that.

  • Actually, lifting up back scores does actually allow you to see a little bit of the high gloss gold plastic that we have for this.

  • This part's here on the top of the thighs.

  • The other gold parts are hidden up underneath the chest and up underneath the leg armour.

  • But that high gloss gold does look pretty good when you can actually see it, which is just not very often.

  • But while we're here before you continue down to the legs, when we take a look at the backpack as well, in this part here in the center will fold out like that.

  • So that just opens up again, detail up inside their details up on the underside of this black part in just detail everywhere on that, These parts here, of course, will come off to connect on to the long, smooth bore a gun, so that just folds out.

  • You've got that on a piston, and there's a little tab at the end of this piston part to make it so.

  • It's not easy to pull up.

  • You can, of course, just pulled it out pretty easily if you pull on it.

  • As long as you don't pull on it too hard, you're not likely.

  • Just pull that far off there accidentally.

  • So that's just connected onto here.

  • And you can move this all around like that to connect onto the gun, which will see here shortly.

  • But so that all seems to work pretty nicely and just fits back up into there.

  • You can see you've got hard points on the back, the backpack and back the arm on the back of the way section for other different option in parts.

  • Now back to the legs and starting up here at the top.

  • The hip joint will just allow this to move up and down like that.

  • There's no swinging hip joint to move forward.

  • In this case, it just moves up and down, and each one is on an individual peg.

  • So the right and left leg can move individually up and down there.

  • We just got some rotation up here at the top.

  • Of course, rotating that does allow you to see those gold.

  • Part's a little bit better, something like that.

  • But again, it's a separate great part there.

  • The front.

  • No stickers, no seam lines on these parts.

  • Everything's all covered so we can bring that leg all the way up to front like that, bending that the knee and there's going to be some pretty cool action here.

  • So this part here on the back of the late will fold back to get out of the way for a nice, good D Ben and these parts on the side, like also move, actually, So it's just gonna think it'll be easier if I just take the leg off of there.

  • So all right, so watch these parts when we bend the knee, those parts on the side move individually.

  • And this part here at the back also moves to get out of the way for that and even like that.

  • And if you want, you can rotate these actually to be pointed backwards like that.

  • Since they're supposed to be kind of like thruster.

  • Sort of been sort of details like that.

  • Anyway, second, rotate those back and moving that back into place.

  • You can't have to manually set these parts back to where they're supposed to be.

  • But still, it's pretty awesome.

  • Everything that went into that of the piston of the top.

  • These hos details down here at the bottom and everything when this all moves together like that all just work super well and looks really awesome like that.

  • So all those parts moving is really cool.

  • We still got even more yet down here at the bottom, this part of the front of the foot, of course, moves up and down like that foot.

  • The toe itself complained all the way down, can point up and down and move that all around Moving the foot forward.

  • You got this piston there at the back of the leg as well can rotate this side to side like that up underneath the feet.

  • You got full detail.

  • They're really cool.

  • And just everything here is just detailed out like crazy every detail that you expect to be there.

  • Ah, the yellow events up in there.

  • Look great.

  • The clear pink part well, looks great, but again, definitely throwing some silver and or white behind that.

  • Well, there's help that glow even nicer, so that'll be awesome.

  • So, man, I think that just about covers it for all the articulation and just the gimmicks and features of the kid itself.

  • But as you can see, there's a lot going on here, and it's all of just the construction of everything for just the general construction of this kit.

  • I mean, it gets 11 out of 10.

  • It's a pretty amazing There's no seam lines on this part of the kit itself that you need to worry about only just a little bit on the weapons, which we'll see in a moment.

  • But we do also need to talk about his accessories.

  • Of course, you do also get this big sheet of marking stickers for this.

  • As I mentioned the in boxing, you do also have some of the tech ident logos there that are kind of already pre weathered kind of damage logos.

  • Let's give you a closer look at those, and we've got some other just kind of logo markings down there, and then this bunch caution markings and stuff.

  • So you just throw these on the kid if you're so inclined.

  • I just didn't In this case, of course, would be nice if these were waterside decals and hopefully band that will make a waterside vehicle set for this kid's gonna be nice to have some of these.

  • These are really nice in terms of just their design.

  • I liked him a lot, So it's just a shame that they're just sticker decals and, of course, have also got our action based adapter for this and our 1 to 100 scale because you keep August figure here, which I do also quite like this one as well.

  • It's a good size.

  • It seems like it might be a little bit larger than it should be for 100 scale.

  • It seems pretty big, but I don't know.

  • I have to measure and get pretty scientific about that to know for sure.

  • Just at first it seems a little bit larger than it should be, but I'm totally okay with that.

  • We're being a little bit bigger.

  • This means that would be a little bit easier to paint, and they've got these two connector pieces for the back, and he's going to be used for the sword or the mace.

  • So first off, here is this sword.

  • Now it's just two parts of the one main part for the whole handle and body of the sword blade.

  • Then you have the white part that just fits over the top of that.

  • There's no sandwiching parts of just one solid piece.

  • You just slide down over the tip and then on to handle there for that, and it looks really great again.

  • All along the blade.

  • You've got some nice detail along their handles, really nicely detailed.

  • You see these air, the grooves for holding into the hand holding hand.

  • How I mentioned has groups, and it seems there's different options where he could place the hand holding it at different points along the handle because it is a pretty long source did next to the kid itself.

  • It comes up, just have got to his face there.

  • So it's a pretty long weapon, and that is pretty much the theme for all of his weapons, because here we do also have the mace, which is see just about a little bit longer.

  • So the makes will actually be taller than the gun them itself.

  • Here in its full length, it does actually get a slight bit longer, and you don't necessarily have to do this.

  • But you can push the handle in, and that will just poke out the apology over there just a little bit.

  • So it's kind of easier to grab with your fingers and pull that out.

  • You pull that out to there and then pull the handle back outs to where it is for the full extension of the mace like that.

  • With the apology ever spike sticking out the end, and I really like that, how it's not just like us, it's circular.

  • It's like hexagonal into shape, so it looks really cool.

  • It's the design of This is really nice.

  • You can hear you guys can hear that shaking.

  • And so it sounds like that's just the parts inside, just kind of sounds a little bit rattling me.

  • Otherwise, it's pretty solid.

  • You do have a little tiny bit of seam line on this part right in there with two main halves, the maze where they come together.

  • It's a little tiny bit of a seam there, but the eyes again, nicely detailed lice in the fact that they detailed it down a little bit.

  • I think the original prototype showed the handle with a lot more detail on it.

  • I wasn't into it, but I think they detail that down a little bit and it looks much nicer now.

  • You got spiky end here at the back side as well, and a cool feature that it doesn't show you anywhere in the manual.

  • They can actually take these parts off the side of here and use these as blaze just two sides, not all for just these two sides.

  • And basically you've got this big Halberg weapon which you can still use, and two parts of this can be just turned into his hand held daggers.

  • And once again, we've got the little not just here in the handle, which will fit very nicely into the holding hands to use these just as just handled weapons on their own.

  • Just a pretty awesome feature.

  • And it's a shame they didn't mention that in the manual cause.

  • I'm just worried that some people may end up missing that detail, but it's not like we necessarily have any shortage of weapons with the sword, the mace and the gun.

  • I think people are gonna be wanting necessarily more weapons, but it is always nice when we do have more weapons included.

  • So the fact this has that kind of extra gimmick that Ben I didn't mention in the manual it's a little disappointing, but at least now all of you guys know that gimmick is also included and so we can move on to his final accessory, which is the smooth, smooth bore a gun.

  • There we go.

  • I like how this in three tones of the darker brown, the lighter brown and white parts all for that.

  • This one does have some seam lines here on this part of the barrel here and in this long part of the barrel, there's a seam line all down the middle of that.

  • But as far as the main body and everything on this back half, there's no seam lines.

  • You were on there and again just really super nicely detailed here.

  • I think it looks fantastic.

  • And aside from the eyes, the only live ballistic or we have for this is for here on the camera lens.

  • For that I wish that would have been a separate, clear green part there for that camera, or at least a separate part of fit inside there to make that little bit easier to paint.

  • But if you don't want to pay and taking Dusty's a sticker, so I'm actually planning on just keeping a sticker and using that thing probably my painted billed as well, because the stickers for cameras do end up usually working pretty well.

  • So obviously, as you guys know, this does have some gimmicks with this as well.

  • Handle will move forward and back like that and also moves signed decided to hold onto that.

  • This part here at the back will move like that for holding on to that part of the backpack becomes around, grabs onto that, and, of course, the whole gun itself holds up.

  • We can slide that Ford, rotate that back and slide it back, and the white part will just kind of way go slot into place.

  • They're like so for our collapsed four months ago.

  • Now this will attach onto the backpack, considers little great parts here on the side.

  • Those will actually extend out a little bit, and then that will form a kind of groove slot system here.

  • Where then?

  • This can just saliva right into there for a storage on the backpack like that.

  • That works really well and looks great.

  • It's the same thing for our connector pieces for the sword and mace that on here, Taylor sides.

  • You can't store all three weapons on the back at the same time, you have toe store, two on the back and one in the hand.

  • I think that works out pretty well.

  • You just slot the character into place there like that, and then the sword it down into their like that should click into place.

  • There you are, stored on the back like that.

  • So very cool.

  • All right.

  • And I know you guys want to see this compared with the 100 skill, non great kids.

  • So here it is going to see some definite easy to notice proportion differences here between the two as well.

  • And I mean, just pulling the old one on him.

  • Scale, kid.

  • Just out.

  • I personally never really had much of a problem with 1 100 Okay, I thought it was a nice kit, but him this mg just completely demolishes it just blown.

  • It's night and day difference between the two of them.

  • The old 100 scale kit now just seems like an old 100 scale, non great double oak.

  • It in comparison like it's fine and it looks pretty good, But it's just not gonna compare to this masquerade here.

  • Not even like the light color differences.

  • The white, the blue, the red is all pretty much the same.

  • The red is a little bit darker, but the main difference that I really definitely appreciate two is the yellow.

  • The yellow is a little bit more oranges yellow than just straight up yellow, as it was in the original kid.

  • It's just a very small difference.

  • They're doing to just the use of the clear parts rather than the stickers for the markings on their.

  • And then it's the stickers.

  • In general.

  • This one has some color correcting stickers here and there on the kid.

  • The color separation of the head is pretty good, but I mean just this one was obviously, in terms of the color separation part separation.

  • It is completely blows that out of the water there with not needing any color, correcting stickers on at all.

  • Of course, the old kid did give you the option to make the arm with the shield on it.

  • And now some of you guys may be wondering if those parts will fit onto here.

  • No, they won't fit on there without any modification.

  • You have to modify that in order to get these parts to fit onto the new master grade.

  • But I assume we're probably will see different version of this masquerade.

  • Coming out is P Bandai exclusives, probably later on.

  • But I could definitely say without hesitation that if you had a choice between the two, just kick the master grade has pretty much just better in every way and on the question of money.

  • This one being 2500 units, one being 4500.

  • And obviously it's kind of almost double the price, but it's definitely definitely worth it.

  • It's just that much better.

  • Oh, man, guys, once you get this thing into some action poses is where you're really going to see it shine, because just standing me it looks pretty cool.

  • You conceal the details or anything like that, but when you get it into some action poses here is where you're gonna see where all of the engineering that went into the frame is really put to the test and it comes out doing amazingly well.

  • It's all really solid.

  • So holds oppose really well.

  • And just the way that everything moves makes it look so natural.

  • And it looks really fantastic just in these action pose, and especially before, like a Gundam like this, where, like the fighting style that we saw in the anime is this really visceral, sort of almost animalistic Malay fighting style like that?

  • Just the ability to re create the posters like that and make it look really cool like this with the kit as well as awesome.

  • Much better than what we've been able to do with the high grade in the 100 scale kits so far, and even posing it with the smooth bore gun, which I did have some worries about.

  • Just because any time you're holding a big gun like that with the gun, um, it's a little bit awkward, and I think actually connecting it onto the backpack works really well, but probably holding this, holding the gun in a wonder it's not connected to the back with you probably be open a little bit easier to posing in some different posing options once connected onto the backpack.

  • That is going give you some nice kind of interesting support, and it looks cool there at the back.

  • But I think if you don't connect it onto the backpack, you probably just you'll have a wider range of options for how you want to actually pose that.

  • Well, it's holding the gun.

  • That said, there is a little bit of Maur articulation in the backpack.

  • Then I alluded to before, and we're going over.

  • The articulation of them, the whole kind of inner part of the connection for the kind of extended arm off the back practice also sort of slide down and rotate a little bit more.

  • So there's a little bit warrant into that.

  • Then I mentioned earlier.

  • Even though it's a little bit awkward to hold a gun, it's still looks fantastic, and everything about this kid just looks great is just a couple little, little tiny bits of seam line there in a couple of parts of the weapons, and otherwise that is pretty much is just There's detail everywhere and as I mentioned in the life build.

  • I really liked how the weapons do seem to match the look of the kit really well.

  • A lot of times you get to the weapons and they're just they don't really seem like so much of an afterthought, but they just seem definitely noticeably simpler than the kid itself.

  • In this case, obviously the weapons are relatively simple.

  • They don't have a huge part count just because of the what they are.

  • You can definitely see that there could definitely see how they match the kid, just in terms of their style and details and everything.

  • Just They look really great with the kids, self and so just in conclusion, guys, if you couldn't tell, I'm goingto highly recommend this kid to anyone, especially if you're in I b o fan.

  • I know there's a lot of iron blood orphans fans out there.

  • You definitely have to pick up this game, even if you're not even for just a fan of master grade or just Gumpel in general, even for not that big of a fan of the Barbato.

  • So I think this kid is so interesting and so well engineered and just a really fun and complex build, and it takes quite a while to get this kid put together.

  • I think anyone who just enjoys building Gumpawa is going to enjoy building this kid even if you're not a big fan of the original design.

  • I think Ben, I did a fantastic job with this.

  • I wasn't totally convinced.

  • When I was first announced some of the details and proportions, I wasn't really sold on.

  • But I think it ended up coming out really, really nice.

  • And I'm really looking forward to working on this.

  • So as I mentioned before and as I mentioned the unboxing, I'm planning on painting this up straight away.

  • So I don't know if you guys can tell, Maybe you can have you been able to tell a little bit in this video?

  • I've already got some parts of this already sanded.

  • I was already working on doing some of just the sanding and cleanup work prep work on this a little bit already, just as I was preparing the parts for the live stream bill.

  • But I've got a little bit more just kind of prep work good into first before we can get into the painting process.

  • But I'll do a couple of work in progress videos because it's gonna be a good process for this.

  • Just Imean.

  • I'm not planning on doing a modification, anything to it.

  • But just the painting and detail ING process of this, especially is going to take a long time because there's so much detail in there and think just to really do this kid justice to bring out all the amazing detail of Ben is packed into the cake.

  • It's gonna take a good amount of time, but it's gonna look amazing when it's all done.

  • So I'm still deciding on the color scheme, and I've got another kid that I'm also working on at the same time, so I'll have a work in progress video for you guys out very soon.

  • We'll get started working on the straightaway, though, and I'll go over any issues.

  • And, like I said, we're moving a couple of steam lines that I pointed on there.

  • We'll go over all of that and the work in progress videos to stay tuned for those in the very near future of this coming week, that'll be coming up straight away.

  • So and so again.

  • Just want to say a big thing you two are gonna store for their support.

  • Wouldn't be able to do everything that I'm able to do without the support from them.

  • So they're awesome.

  • You guys are awesome to think so much for watching.

  • There was a lot to go over this review, but I really wanted to make sure to emphasize everything that is fantastic about this case because it is a really great kid.

  • So of course you guys have any further questions or comments.

  • Feel free to leave those down below.

  • Thank you all again for watching.

  • And I'll see you guys next time.

  • Bye bye.

How's going, guys?

Subtitles and vocabulary

Click the word to look it up Click the word to find further inforamtion about it