Gonna f 90 is a really cool kit is I got to tell you guys a real shame that this the people and I kit that it's not widely accessible to everyone that we all can't easily just go out and pick this up on the shelves anywhere that you have to get this through.

P.

Bandai Sellers.

Because, man, this kid is pretty awesome.

And it's a very good master grade, and it's a completely new master grade as well.

So it's just a shame when we get these people back, it's there completely, entirely new.

We've seen a couple of the mountain HT lines so far, but to see a full on master grade like this, being entirely new kid and being such a good kid, too, then it just really sucks.

But I highly recommend you guys, if you like this design, just pay up what you have to pay to get one.

And it shouldn't be all that too expensive, as the list price for this was relatively low.

So even through people die of resellers, it shouldn't really break the bank too badly, I would expect and it's definitely worth the price.

It doesn't really come with a whole lot in terms of like a whole bunch of accessories.

It's pretty standard.

Just your shield beam rifle and beam.

Saber is pretty standard.

Gundam load out, but the kid is super solid.

The color separation is really, really good.

You have some nice details in there, and just the style of it is just really cool and unique as well.

So as always, guys.

A big thank you to s a Gundam store for making this possible.

If you guys want to check out some people and I stuff or anything, they're on their side, the link to us again and still be down below.

Go there and use the coupon code.

Zach Earliest 10 save 10% off everything.

They're on their site, including anything people and I and all of that as well.

All right, so one of the perks of this being a peep and like it is that we do get some really nice waterside decals included.

Now, if this was a standard release, we fortunately wouldn't have any water sides in it.

Most likely these would just be regular sticker decals.

So I guess there is a bright side to it being p Bandai in one aspect, I suppose we have a really nice F S F F 90 logos on their the S and R I logo.

So some nice marking logo's like little triangle details that you use and in the system standard kind of caution marking logo's.

They're mostly and white and red and a few gray ones in there as well.

We've got a little action based adapter here and for our hands, there's gonna be this swappable finger types.

You have just these for making closed fists.

You also have a set for holding the beam sabers, and then you have a set with the trigger finger extended for holding the beam rifle.

The beam saber handles are stored up there on the backpack.

As you can see, we've got the clear blue beams.

Ever affect parts for this?

Also, the kind of refreshing change of pace because, you know, usually typically with any sort of Gundam type mobile suit like this, they're pink in this case than being blue is a nice change of pace.

Now you've got the beam rifle, which is pretty cool, like the style of this and of course, very nicely detailed there as well.

I've got a little sticker for the camera lens.

For that, the energy pack on the back can be removed like that and all.

They'll have pegs on them to be able to plug into the back of the shell.

Joshua, in a moment, the secondary handle towards the front does moves.

I decide this kind of your typical Gundam beam rifle like that.

And then we have the shield against some really nice color separation in here with the grey farts feel apart.

Read parts all poking through the white and blue color scheme on the back of the shields of nice detail there in white and gray.

And there's our extra ammo packs, two of them plugged into their.

You do also have 1/4 1 as well, which is not really useful for anything.

You can't really do much with it, but you do have a 4th 1 of those.

If you like, this will blood onto the arm and then you have this handle here which will move that you can attach the hand onto their like that.

Now, this kid did utilize some foil stickers in here as well.

Most of the amazing color separation that you can see.

There is mostly just separated parts, but some of this is stickers.

So here on the head, of course, we have stickers for the eyes in the head camera up there at the top, around here, back tucked up in there.

You do have a blue full sticker for the camera in the back of the head as well You're on the backpack, that white triangle there that is a sticker on the sides of the arms and size of the legs There little yellow and black triangle stickers there on the front of the front skirts, little red and black triangle stickers there and then on the front of the ankle armour.

Little black and red stickers here.

So this is probably the biggest sticker there.

But again, it's all pretty much just for these little tiny little triangle details, which mean they could have maybe done some of those and separate parts if you just take a look around the kid in general.

I mean, like the little gray and yellow bits poking out there on the side of the chest, little yellow bit there on the side of the chest and all these little yellow bits poking out of little grey bits poking out here and there and there.

And they're everywhere here on the feet, little yellow and gray events there.

And then this is not sticker related, but you have.

The mesh hose is here, at the back of the ankles there and then on the front of the feet.

They're kinda really hard to see.

This mesh hose is that wrap around there on the inside of the front of the foot there as well.

Similar, like with the masquerade Gundam mark to also used light utilizes.

That's what it's like Masquerade Hazel and a couple other mass Great kids.

Personally, I don't really like that all too much, because a lot of times at the end of the day they don't really often look the best.

I would kind of prefer if that was just a separate part for them.

They probably run into if they try to make parts that look like that is in the oftentimes, you'll have mold line going through the details and you have a bunch of little tiny little details there to make it look sort of like a mesh hose in some cases.

And if you have mold lines running through that just kind of impossible to really do much of anything with that.

So I guess there's pros and cons.

The MASH does look pretty cool if you're gonna build this distracted the box.

It does look nice now before we get into.

Some of the articulation is with one of the reader right again just how solid this kid feels.

Nothing on this kid feels loose at all.

It just feels solid, like a rock.

I know you guys will appreciate that.

I generally don't do this in my reviews, but just prove how solid this kid is, just shaking it like that pretty strongly.

And it's kind of barely bending the knee a little bit.

And that's about it.

So really super silicate Butt head will go up to about there, which is not that much.

I kind of wish they had a little bit more upward movement there at the head, but it's not too bad.

And then down to there and of course, rotation, everything I do kind of like the fact that the V Finn is a little bit more displayed out.

It's not quite a as much of an upward angle is where usually seeing forgot him.

So it's a little bit different, little more unique.

Look to that again that has a color separation here, with little Balkans being separate parts in there and everything for our torso section.

We have a stomach crunch to the front and back there like that.

So that's also pretty nice.

You also have a little bit of side to side movement there at the base, where it connects to the top and bottom half get together basically.

And then some rotation here as well, of course, and the cockpit does open up.

There you go.

Kind of tricky just opens up like that, and inside we do have a seat and pilot figure a way up in there may be a little bit hard to see, but he's up there, Believe me.

As for the shoulders of those will rotate forward and back with that can pull out to the front like so so pretty nice like that.

And then the shoulder armor itself will move freely up and down like that.

Ultimately, we can bring the arm up all the way up to there, which is pretty darn good out there as well.

You may have heard this part fall off.

This is the only part that I'm noticing.

Does have a tendency to fall off kind of easily.

Is this part here covering this side skirt?

Now you guys are unaware there's different ad on sets available for this.

Actually, we just recently got an announcement of another Adam Pak they're coming out with.

But this is just for one of the hard points for as some of the Adam parts feel to plug their onto the side skirt.

So it's good that that's not too tight, cause then be kind of a pain to try to take off your wanting to use the Adam parts.

But if you are just wanted to keep that on there permanently, maybe just a little bit of drop of glue to make sure that doesn't get lost or anything, baby, back to the arms.

They work pretty much as usual rotation there at the top.

Nice double joint here at the elbow is give you a really full bend.

Their the wrist is just connected via a ball joint there, as usual as well down here for the skirt armor.

Those will move individually could bring those all the way up.

And there's some nice detail up inside there as well.

This side skirts not going to look quite as far this because they're kind of running into the side of the torso there.

But I guess if you bent a little bit like that, you could get a little bit more out of the way, like so going around here to the Baxter.

You have these three little hooks which will all open up like that.

And this is for storing the beam rifle on the back skirt.

So those will just grab onto the beam rifle like that for storing that on there.

It looks pretty cool, I got to say, but otherwise this Baxter doesn't move it all.

But we do have a pretty interesting way.

The whole hip section moves in order to put our extra bits adapter in place years.

So this whole front part here will kind of fold down and out like that, and then this middle section will all rotate forward.

You take your action base adapter, slide it up into place their clothes, that back up, close this back up here on the front and then you're actually adapter ist very firmly connected up into the hip section.

There, as far as the leg articulation, those could come all the way out to the side.

There, Even though I said the scruff sites, Kraemer does get in the way a little bit.

Let me see if we have this move this way.

And besides, Carmen will only come to their then still, the leg can still only come out to about there.

But that's really not all that bad.

You, of course, got some rotation there at the top of the leg.

And then if we move this front, skirt up, out the way a little bit, you can bring the leg up all the way forward up Thio there and then our bend at the knee is gonna give us a really nice full 180 degree bend there at the knee.

Very nice.

No separation of this knee armor part there, but it is still really nice.

Knee bend.

His ankle armour is actually connected at the back of the ankle, but that will still move up and down a little bit like that.

The feet will move side to side and no problems there.

There's no Tobin, unfortunately, but this foot can still come up to the front like that, and then all the way back down like that up underneath the feet, some really nice part separation and detail up underneath there as well.

Very cool s then.

We can't forget about the backpack, though.

Here as well.

These thruster bells are just Baldwin's.

So these veal to move around a little bit like that, you consider a change.

The angle of those and the rats were the beam saber handles plug into.

You can also rotate just a little bit of history to change the angle of those a slight bit, but not really all that much, and the beam saber handles just pull out of there easily.

I like the design of these how they're very slim and just have a cool, unique look to them just a little bit different a little bit longer.

In terms of just like overall proportions of the bodysuit, handles are pretty long and just very.

That slim design does make them look pretty cool.

And just for a size comparison here, as you guys may be well aware, the F 90 not the biggest Gundam, so it's gonna be a little bit smaller.

And, as you can tell, compared to this, your standard size 18 meter mobile suit there, the gym sniper to India.

It's definitely going to be smaller than your average master, great kid.

But again, that just means it's just much more impressive.

The little tiny bits of color separation part separation you get with this kid in a relatively small package.

All things considered, so really besides the fact that this is a P Bandai kit and therefore going to be of limited availability, there's not really a whole lot to complain about it.

They're articulation is really nice color separation and part separation of it is all really nice.

It's really solid feeling kits.

It's got some nice details on there as well.

There's practically nothing you have to worry about with steam lines with this kid they have to get rid of, and even on top of all that comes with some waterside decals as well.

So It's very highly recommended kids, if there's really nothing much that I could really say differently about it, I mean, I would like pretty much everything about There's nothing really that I would change if there was one very tiny nitpick that I would make with this one thing that I wish would have been, including the box is a set of open hands.

It's nice that we have holding hands, trigger finger hands and close this.

One other option of just having this open extended fingers to make an open hand as well would have been nice.