Placeholder Image

Subtitles section Play video

  • Welcome to the Seamaster Diver 300M Video Manual.

  • Positioned on the side of the watch is the crown,

  • which is used for setting the time and adjusting the date.

  • In its normal wearing position,

  • the crown ensures the watch is fully water resistant.

  • It has to be unscrewed before the time can be set.

  • Although the watch is self-winding,

  • when the crown is in this position,

  • it can be wound forward for extra power.

  • To set the time,

  • pull the crown out two clicks to its furthest position.

  • The seconds hand will stop.

  • Turn the crown forward or backward

  • to move the hour and minute hands to the desired time.

  • To adjust the date, pull the crown to position 2

  • and turn it backward until you reach the desired date.

  • To re-seal the crown, make sure it's in position 1.

  • Then push it firmly while screwing it clockwise.

  • The bezel with its dot and scale is used for indicating elapsed time,

  • for example, during a dive.

  • By positioning the luminescent dot at the minute hand

  • when starting the dive,

  • the diver can easily see how much time has elapsed.

  • The bezel rotates only in one direction.

  • This ensures that

  • the elapsed diving time cannot be accidentally decreased.

  • To reset the bezel, rotate it all the way around.

  • For ease of reading in low-light conditions,

  • the watch's hands and applied indexes

  • are coated with Super-LumiNova which emits a blue light.

  • The exceptions are

  • the minute hand and the dot on the bezel.

  • Their coating emits a green light,

  • distinguishing them from the other hands

  • and allowing comfortable reading of the elapsed time,

  • even under water.

  • A feature created specifically for professional divers

  • is the helium escape valve.

  • When they are working at great depths,

  • these divers spend several days in a pressurized environment.

  • Here they breathe

  • a special blend of gases containing helium.

  • The small helium molecules are able to push past the seals

  • and enter the watch case.

  • To operate the valve, unscrew it

  • as the decompression process is taking place.

  • The helium escape valve allows these molecules

  • to escape in a controlled fashion.

  • Your metal bracelet can easily be extended

  • to fit over a wetsuit.

  • First, press the two pushers on either side of the clasp

  • and release the bracelet.

  • On the opposite side,

  • unclip the extension and elongate the bracelet further.

  • To re-set the bracelet to its original length,

  • simply reverse the process.

  • Carefully replace the extension

  • so that it clicks properly into position.

  • Thank you for watching this video manual.

  • We hope you enjoy your Diver 300M.

Welcome to the Seamaster Diver 300M Video Manual.

Subtitles and vocabulary

Operation of videos Adjust the video here to display the subtitles

B1 crown bezel bracelet diver helium position

OMEGA Seamaster Diver 300M Calibre 2500/2507 - Video Manual

  • 151 9
    Dada Lu posted on 2013/11/03
Video vocabulary