Placeholder Image

Subtitles section Play video

  • Let's say I have something moving

  • with a constant velocity of five meters per second.

  • And we're just assuming it's moving to the right,

  • just to give us a direction, because this is a vector

  • quantity, so it's moving in that direction right over there.

  • And let me plot its velocity against time.

  • So this is my velocity.

  • So I'm actually going to only plot

  • the magnitude of the velocity, and you

  • can specify that like this.

  • So this is the magnitude of the velocity.

  • And then on this axis I'm going to plot time.

  • So we have a constant velocity of five meters per second.

  • So its magnitude is five meters per second.

  • And it's constant.

  • It's not changing.

  • As the seconds tick away the velocity does not change.

  • So it's just moving five meters per second.

  • Now, my question to you is how far does this thing

  • travel after five seconds?

  • So after five seconds-- so this is one second, two second,

  • three seconds, four seconds, five seconds, right over here.

  • So how far did this thing travel after five seconds?

  • Well, we could think about it two ways.

  • One, we know that velocity is equal to displacement over

  • change in time.

  • And displacement is just change in position

  • over change in time.

  • Or another way to think about it--

  • If you multiply both sides by change

  • in time-- you get velocity times change in time,

  • is equal to displacement.

  • So what was of the displacement over here?

  • Well, I know what the velocity is--

  • it's five meters per second.

  • That's the velocity, let me color-code this.

  • That is the velocity.

  • And we know what the change in time is, it is five seconds.

  • And so you get the seconds cancel out the seconds,

  • you get five times five-- 25 meters-- is equal to 25 meters.

  • And that's pretty straightforward.

  • But the slightly more interesting thing

  • is that's exactly the area under this rectangle right over here.

  • What I'm going to show you in this video,

  • that is in general, if you plot velocity,

  • the magnitude of velocity.

  • So you could say speed to versus time.

  • Or let me just stay with the magnitude

  • of the velocity versus time.

  • The area under that curve is going

  • to be the distance traveled, because, or the displacement.

  • Because displacement is just the velocity times

  • the change in time.

  • So if you just take out a rectangle right over there.

  • So let me draw a slightly different one

  • where the velocity is changing.

  • So let me draw a situation where you have a constant

  • acceleration .

  • The acceleration over here is going

  • to be one meter per second, per second.

  • So one meter per second, squared.

  • And let me draw the same type of graph,

  • although this is going to look a little different now.

  • So this is my velocity axis.

  • I'll give myself a little bit more space.

  • So this is my velocity axis.

  • I'm just going to draw the magnitude of the velocity,

  • and this right over here is my time axis.

  • So this is time.

  • And let me mark some stuff off here.

  • So one, two, three, four, five, six, seven, eight, nine, ten.

  • And one, two, three, four, five, six, seven, eight, nine, ten.

  • And the magnitude of velocity is going

  • to be measured in meters per second.

  • And the time is going to be measured in seconds.

  • So my initial velocity, or I could

  • say the magnitude of my initial velocity--

  • so just my initial speed, you could say,

  • this is just a fancy way of saying

  • my initial speed is zero.

  • So my initial speed is zero.

  • So after one second what's going to happen?

  • After one second I'm going one meter per second faster.

  • So now I'm going one meter per second.

  • After two seconds, whats happened?

  • Well now I'm going another meter per second faster than that.

  • After another second-- if I go forward in time,

  • if change in time is one second, then I'm

  • going a second faster than that.

  • And if you remember the idea of the slope from your algebra one

  • class, that's exactly what the acceleration

  • is in this diagram right over here.

  • The acceleration, we know that acceleration

  • is equal to change in velocity over change in time.

  • Over here change in time is along the x-axis.

  • So this right over here is a change in time.

  • And this right over here is a change in velocity.

  • When we plot velocity or the magnitude of velocity

  • relative to time, the slope of that line is the acceleration.

  • And since we're assuming the acceleration is constant,

  • we have a constant slope.

  • So we have just a line here.

  • We don't have a curve.

  • Now what I want to do is think about a situation.

  • Let's say that we accelerate it one meter per second squared.

  • And we do it for-- so the change in time

  • is going to be five seconds.

  • And my question to you is how far have we traveled?

  • Which is a slightly more interesting question

  • than what we've been asking so far.

  • So we start off with an initial velocity of zero.

  • And then for five seconds we accelerate

  • it one meter per second squared.

  • So one, two, three, four, five.

  • So this is where we go.

  • This is where we are.

  • So after five seconds, we know our velocity.

  • Our velocity is now five meters per second.

  • But how far have we traveled?

  • So we could think about it a little bit visually.

  • We could say, look, we could try to draw rectangles over here.

  • Maybe right over here, we have the velocity

  • of one meter per second.

  • So if I say one meter per second times the second,

  • that'll give me a little bit of distance.

  • And then the next one I have a little bit more of distance,

  • calculated the same way.

  • I could keep drawing these rectangles here,

  • but then you're like, wait, those rectangles are missing,

  • because I wasn't for the whole second,

  • I wasn't only going one meter per second.

  • I kept accelerating.

  • So I actually, I should maybe split up the rectangles.

  • I could split up the rectangles even more.

  • So maybe I go every half second.

  • So on this half-second I was going at this velocity.

  • And I go that velocity for a half-second.

  • Velocity times the time would give me the displacement.

  • And I do it for the next half second.

  • Same exact idea here.

  • Gives me the displacement.

  • So on and so forth.

  • But I think what you see as you're getting-- is the more

  • accurate-- the smaller the rectangles,

  • you try to make here, the closer you're going to get to the area

  • under this curve.

  • And just like the situation here.

  • This area under the curve is going

  • to be the distance traveled.

  • And lucky for us, this is just going to be a triangle,

  • and we know how to figure out the area for triangle.

  • So the area of a triangle is equal to one half

  • times base times height.

  • Which hopefully makes sense to you,

  • because if you just multiply base times height,

  • you get the area for the entire rectangle,

  • and the triangle is exactly half of that.

  • So the distance traveled in this situation,

  • or I should say the displacement,

  • just because we want to make sure we're focused on vectors.

  • The displacement here is going to be--

  • or I should say the magnitude of the displacement,

  • maybe, which is the same thing as the distance,

  • is going to be one half times the base,

  • which is five seconds, times the height,

  • which is five meters per second.

  • Times five meters.

  • Let me do that in another color.

  • Five meters per second.

  • The seconds cancel out with the seconds.

  • And we're left with one half times five times five meters.

  • So it's one half times 25, which is equal to 12.5 meters.

  • And so there's an interesting thing here, well one,

  • there's a couple of interesting things.

  • Hopefully you'll realize that if you're plotting velocity

  • versus time, the area under the curve,

  • given a certain amount of time, tells you

  • how far you have traveled.

  • The other interesting thing is that the slope of the curve

  • tells you your acceleration.

  • What's the slope over here?

  • Well, It's completely flat.

  • And that's because the velocity isn't changing.

  • So in this situation, we have a constant acceleration.

  • The magnitude of that acceleration is exactly zero.

  • Our velocity is not changing.

  • Here we have an acceleration of one meter per second squared,

  • and that's why the slope of this line right over here is one.

  • The other interesting thing, is, if even

  • if you have constant acceleration,

  • you could still figure out the distance

  • by just taking the area under the curve like this.

  • We were able to figure out there we

  • were able to get 12.5 meters.

  • The last thing I want to introduce you to-- actually,

  • let me just do it until next video,

  • and I'll introduce you to the idea of average velocity.

  • Now that we feel comfortable with the idea,

  • that the distance you traveled is

  • the area under the velocity versus time curve.

Let's say I have something moving

Subtitles and vocabulary

Click the word to look it up Click the word to find further inforamtion about it