Name: How To Install Ring Doorbell
Uploaded: 2020-12-30T18:20:04.000Z
Duration: 2 min 45 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

first fully charged the included battery by plugging it into a USB port or power supply.

With included cable, we recommend fully charging the battery before installation.

Even if you're wiring in your video doorbell, you'll know the battery is fully charged.

When, on Lee, one of the L E D lights is lit.

You'll hear a click when the battery is secure, open the ring app and start the set up process.

Then just follow the instructions in the APP.

It's time to install your video doorbell theme.

Optimal installation height for video Doorbell is 4 ft off the ground.

If you're connecting video doorbell to existing wires that air higher than 4 ft, install the included wedge mount to angle it down for a better view before you begin, shut off power at the breaker, then remove your existing doorbell button from the wall and disconnect the wires.

Insert the included many level into this slot on your video doorbell.

Use your video doorbell as a template to mark the install location.

Center the bubble on the mini level to ensure it straight.

If you're installing video doorbell on stucco, brick or concrete.

Use the provided Drillbit to drill holes into your wall and insert the included anchors into the holes.

If you're installing on wood or siding, you can skip this step, then loose in the terminal screws on the back of your video doorbell.

If your doorbell wires air too short, tow wire to your video doorbell.

You can use the included wire extensions and wire nuts to extend them.

To do this, line each wire extension up with the doorbell wire and twist the wire nut onto them clockwise until they're securely connected.

Yeah, now you can secure the doorbell wires under the terminal screws.

Give them a little tug to make sure they're firmly attached.

As long as one wire goes to each screw and the wires aren't touching, then feed all the wires back into your wall.

Next, secure your video doorbell using the provided screws.

Next, remove the mini level and pop on your face plate.

Start at the top and click it into place.

Switch the included screwdriver bit to the star shaped end, then use it to secure your video doorbell with one of the included security screws.

Turn power on it, the breaker and you're done.

Subtitles ListPlay Video

How To Install Ring Doorbell

process

recommend

matter

straight