Placeholder Image

Subtitles section Play video

  • This is the lock picking lawyer, and today we're looking at what it takes to drill open a standard disc padlock.

  • Now, because padlocks tend to be flopping around, drilling them can be both difficult and dangerous.

  • Difficult because it can be hard to drill accurately and dangerous because the drill bit can slip and hit your hand.

  • That's particularly so when you're first getting the bits started.

  • That's why I like to use a disc padlock drilling Jake like this one.

  • It takes advantage of the circular bulges on the front and back to line up the bit with the sheer line.

  • Using it is very easy.

  • Simply place it in, tighten it down, and then we can drill right through that hole with a 3 16 strobe it.

  • So let's see how this Brinks model are 70 with stands are drilling.

  • Yeah, that Okay, I think we got through all of the pens on dhe.

  • Let's see if we have anything we need to clean out hopes.

  • Yeah, there we go.

  • As you can see, the drill bit caught onto the back of the core right after we finished with the last pin and it just pulled that shackle open.

  • So this jig certainly makes drilling these locks more safe and consistent.

  • But I think with an investment of time and practice, picking will still be the faster and safer way in.

  • In any case, that's all I have for you today.

  • If you do have any questions or comments about this, please put them below.

  • If you like this video and would like to see more like it, please subscribe.

  • And, as always, have a nice day.

  • Thank you.

This is the lock picking lawyer, and today we're looking at what it takes to drill open a standard disc padlock.

Subtitles and vocabulary

Click the word to look it up Click the word to find further inforamtion about it

B1 drilling drill padlock disc jig dangerous

[1050] The “Disc Buster” Padlock Drilling Jig

  • 1 0
    林宜悉 posted on 2020/04/07
Video vocabulary