Name: Working on Skunkworks once again! Most OVERKILL Gaming PC
Uploaded: 2020-03-31T07:47:02.000Z
Duration: 10 min 16 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

Adverbs of degree

And a lot of you have seen this video coming from a mile away.

And ever since case lab stopped making the case is it became even more obvious that I was gonna be doing something with Skunk works where it is.

We're doing a first part of it right now where we're going to upgrading the motherboard, the processor, the block.

We'll be changing out one of the reservoir tubes.

We're gonna flush the system and we're gonna be obviously upgrading the CPU to a 79.

X 16 core 32 thread processor from Intel on X 2 99 is currently the next 99 69 50 x, No slouch with too tight.

Next, Pascal and yeah, So we're gonna be doing a few things to get the motherboard in the process of the block.

We're gonna flush the system, and then we're gonna prepare it for its final phase of the upgrade.

I'm sure you guys can figure out what that's gonna be.

This video is sponsored by Nord VPN and protecting your Internet experience is more important than ever.

We conduct our entire lives online these days online banking, online shopping, online communication.

And you don't want people spying on that, let alone your I S P s with the ongoing litigation between net neutrality, Nor VPN has more than 4000 servers in over 60 countries, including areas like the Middle East, Africa, Europe, you name it.

The best thing is work's on your mobile devices as well, so stay protected wherever you go with North VPN.

And right now you can save 66% on a two year membership by using Offer Co.

Two cents are clicking the link in the description below.

As you see, the packaging is even different.

So it's It's an improved design and improved flow.

That's obviously something that's changed quite a bit over time is the higher court count, which means they've had to sort of improve their block designs.

It's a little bit bigger, as you can see now.

And of course, has RGB very nice see through top plate on there because we'll be going with new water blocks of obviously for the graphics cards, which are gonna be clearly 28 e t I r T X cards.

Because Skunk Works has always been a centerpiece of the channel designed to be impractical, overpriced and really a lot like me, you probably pay too much for watching my continent of free is way overcharged.

And, uh, I'm I'm kind of loud and sort of unnecessary.

So I'm going with the X 2 99 for the win Kay from E V.

They They still are my favorite brand of motherboard because they're simple.

Ever since they kind of re vent their motherboard team all the way back to Z 77.

That's what actually has rgb and stuff on it so we can spice up our build a little bit.

I didn't go with the dark because the darkest met for extreme high end over clocking just a bit.

I know, I said, this build is supposed be overkill, but it's a bit overkill for this build.

And to be honest, the gold wouldn't go with our theme very well.

So that's why we ended up going with this.

I currently have a next 99 classified in here, which has been more than solid for me over the last several years.

I've been running this build, and so I figured, I'm going to stick with what has worked for me.

And that's exactly what we're using here all this time that I've been showing you guys how one of the loops always looks a little bit darker than the other.

That was a true issue, obviously, with the yellow and orange.

I mean, it turned brown straight up fluid color change.

But all of that fluid color change over time has slightly tinted the right tube.

The way we figure that out was the last video that we did.

If you haven't will recheck this fluid, having been two years old, and we saw that nothing was clogging anywhere.

We mixed both way mixed both loops that I was knocked over.

I mixed both loops together in the same jug and then poured them independently back into their loops and saw that the right loop was slightly darker again, which was impossible considering it hadn't even run yet.

So that got me to thinking that that tube is tinted ever so slightly.

So we're putting in a brand new acrylic tube in there, and that should be that.

So one thing we're going to deal with here is this pass through fighting is not gonna line up with my cards anymore because envy link is whiter than s Ally.

This block right here has to scoot back slightly on the new cards.

I had actually shave off a corner of the video bridge because it didn't work with the Ikea water blocks because it hit because it was in your pointy.

So I actually flattened out those edges right there.

So that means that the figure out something when the cards get here on how to straighten it up.

So when I do, when we do that, that's gonna be mostly just putting on the new graphics cards of water blocks.

Everything else already be in there and then figuring out this bend.

I'm really praying that the CPI location on this motherboard and the new motherboard are exactly the same, or I will have to re bend this tube, and, uh, this won't be easy.

It's just a single 90 these double nineties man of those a pain in the butt.

So I might have to redo this too at the most.

So what do you say we just go ahead and do it old school style where we just block it?

But they'll be much better montages in the ones I used to be.

Because, of course, we've got frickin Phil here running the show.

I mean, did in the first try already expect I am a professional.

Okay, we got the new motherboard in, Of course, the DVD a x 2 99 for the win.

Kay, we've got my new 79 60 x 16 core CPU.

And there we've got the new velocity RGB water block That's on there.

We actually to come up with a custom RGB solution For that, we'll show you how we did it in the next video because that's a RGB blocking this motherboard.

Although it has rgb on its own little covers, it doesn't have a single header on the motherboard designed for 12 volt or addressable or any of that.

So we had to actually scramble to figure out how we're gonna light up both of my graphics card blocks and my CPU block.

Most gonna be putting UV lighting in here, So I'm gonna be sticking with the green bright UV green that glows in the dark.

I love the way you be green Looks member.

So yeah, our loop, as you can see, is redone.

We had to do that bend again to Ben's had to be redone.

I ended up using this double rotary swivel footing here.

I just like the way it looks more abstract, and that's because of the design on the motherboard.

I just felt like I wanted to add up something in there a little bit less clean, a little bit more against the green, but just enough to be different, but not really trigger O.