Placeholder Image

Subtitles section Play video

  • it's going on, guys.

  • So today we're going to take a look at the S d neos Young.

  • This is a kid that I've had for a while, and a lot of people have been asking me to review for a long time.

  • So finally getting around to building, interviewing this case for you guys.

  • So let's take a look at this.

  • I've always talked about this kid as being a really nice kid.

  • Obviously haven't built it yet, but I everything I know about everything I've seen about this.

  • It's a very good one of the better SD kits, for sure, and especially a really great option, especially if you don't want to spend.

  • What is it, $300 on me like that for the H G version of this if you wanted.

  • If you like the design, but you don't want to spend that much money or you don't have the space, everything do is HD version is gigantic, so this is a much deeper, much smaller option, I think is still pretty good.

  • Still looks pretty cool on it includes the effect part for it, which the HDC version that was a peep and I add on set for so very cool.

  • All right, so I know a really nice box are here on the front, as always.

  • Looks cool.

  • We got the SD Shin Andrew head poking out there at the top and all that, although, honestly, a bit surprised that there is no s d former unicorn flying around in the background or something like that.

  • So, as always, guys big thinking us a gun store for their support, you can check out this, get everything else.

  • They're on us a condom store.

  • The link is done below.

  • Check that out and save 10%.

  • With my coupon code.

  • There's a really is 10 you on the side of the box eyes.

  • This is number 3 92 in the SD line.

  • And here on the other bottom.

  • Anyway, there's gotta look at the kid.

  • They're posed up with all the six arms, all spread out like that, and then look at the detail underneath.

  • So you got some nice detail there of the open hatch gimmick there on the front where the bazooka can pop out.

  • You got that?

  • And you've got this able to be attached onto a stand there like that you've got the effect car, which looks really nice.

  • He also got this effect part for over the Shane Andrews head that plugs into the shield there behind his head there and then, insider, you do have the full estacion and you kiss.

  • You can have that posed out of the news young separately if you want to.

  • So it's basically all that on its weapons beam rifle and the bazooka there as well.

  • You can just put that all inside the neos young.

  • I'm guessing there's gonna be some parts forming involved, I'm sure, but anything that looks really nice as well.

  • So on other side here is just a look at what the kid is gonna look like.

  • I think this is just supposed to be what it looks like straight out of the box there without any pain, to hear anything done to it.

  • So even strike the box looks pretty good on then.

  • Over here we do have a CG image.

  • Looks like composite there with the full armor Gundam.

  • Furthermore, Unicorn Gundam and also the Banshee Norn.

  • There s D kits which are also available.

  • So I got those endless price here.

  • You can see for this Get 2000 yen.

  • So not too bad.

  • I mean, it's a little bit high for an SD kit, but its conceits a pretty sizable box.

  • And I've got a good amount of stuff in there.

  • Eso get the full estacion, Andrew and then basically a full other kid with Ponyo's young pretty sizable one at that.

  • So not a bad price of thing for this, considering again like the a juicy version costing around $300 or something like that, plus shipping.

  • So yes, expensive.

  • You're gonna have a lot of stickers on here, Basically any version of the son.

  • And, of course, for the lining everything.

  • You're gonna have either bunch of stickers or decals or something other than RG, of course, but obviously they're not gonna do that type of molding for SD kits.

  • I can only ask so much, but everything does look pretty cool.

  • It looks like you have some nice details on there.

  • It looks even slightly on the armor anyway.

  • Slightly more detailed or at least similarly detailed to the geek.

  • It actually So although I do have that kids, it is packed away, so I don't think I'm gonna able to do a comparison for you guys.

  • Put you will, I think, get the idea.

  • Just take a quick look here at the manual as well, and you've got a nice big reference photo there with a painted kit.

  • Looks like when it's all done.

  • It looks very nice on the back side.

  • We have the typical comic here, the comic world.

  • So for anyone interested, just here's a look through that You got a little Delta plus making a cameo there as well before he's getting blown up or something there, I guess.

  • And so, yeah, it looks pretty cool.

  • Let's take a look on the inside.

  • You've got just another image there.

  • Like what we saw on the outside of the box of information here in Japanese, who got the painting guide down here as well for the neos young and then finish in under the painting guy there is separate.

  • The colors are actually gonna be slightly different between the two of them.

  • Then Goebbels, to explanation just again, is going over some details, pointing out what's what on the kids and all that.

  • It's all in Japanese as this kid came out before he started implementing Maur English in the manuals.

  • But that's okay.

  • It looks like, Oh, this is gonna pulled out.

  • Very interestingly.

  • Opens up like a big map s o.

  • Here.

  • We have the parts list up here.

  • It looks like you're gonna be using everything.

  • Looks like you don't have any exes on there, actually.

  • So at school and then just goes through the construction.

  • We've got step one here.

  • I'm guessing.

  • Yeah, it looks like you build up the Shin Andrew first.

  • There, on these steps, one through 14 building the so Nandu.

  • Or actually goes to 15 18 and then the weapons covered down there you go all that up, and then you start on, you have a little stand there for that as well.

  • That's cool.

  • And then you start on the new Eos young parts and then how to build a show around you into that.

  • And then we go back to our color pages here to finish up the construction.

  • So you're just finishing a big construction there of the meals, young and all that, and then applying the effect parts on just that stuff.

  • They're so very cool.

  • All right, let's get a look at the runners.

  • All right, So here's a look at the oil sticker sheet once again, and yet it is pretty extensive, but again for us.

  • And undo not that surprising and foreign SD kit.

  • You should also expect a good amount of just released a few color correcting stickers on there as well.

  • So while it's not great news to see this money stickers, they also shouldn't be all that surprising.

  • We got runner PC seven here for some public capt.

  • Bull joins.

  • Got three of this runner, actually, and also PC 300 for some more, and then a couple of their polecat parts.

  • They're all in gray.

  • We've got Runner s V one here for our stand in black and looks very simple, but effective enough looks, you know, good enough for something like this.

  • It doesn't bet.

  • All right, the runner a is going to be for the S T Shin under, So you've got a couple of clear yellow parts up there for the beam.

  • Saber and theme.

  • Expect parts in your lives for the beam saber.

  • The handle is molded together with the beam effect part unfortunately, so you auto mask and paint that handle off, not divorce thing in the world.

  • You also got the clear part for the model I there and yellow as well.

  • You got the white parts for the fuel tanks of a bunch of red parts there for the torso that had the shield and then some black parts over there on the side as well.

  • Letter B.

  • Then a bunch of this armor parts for the arms, legs and backpack in red corner.

  • See some gray parts here for some detail parts the axe handles and the rifle on their from D is now getting into the neos young parts.

  • You can see some very large parts here in this little bit darker shade of red.

  • Anyone?

  • We got the fuel tanks, a couple of armed parts on there.

  • The part for the front of the body of the neos eon and then order E to is a copy of that runner minus the part for the front of the body in the F one back to grey again for some bazooka parts and some more of the great detail parts, including all the fingers, everything for the neos young and also f to a copy of this half of the runner over here and lastly, runner G here, obviously for some of the larger grave parts there for the neos young.

  • And it looks very cool.

  • That detail does look really nice on this.

  • Look good.

  • It's all right.

  • As you can see for an SD killer is still a good amount of stuff to build in there.

  • And I can see there's definitely going to be a lot of missing color raps on this.

  • I mean, as typically goes US tickets.

  • You can look forward to a lot of masking if you're planning a painting this but didn't look too bad in terms of just overall mold quality of details, everything looks good.

  • So I'm gonna get this all built up and then we'll see how it looks.

  • All right, here's how it's gonna look straight out the box, and hopefully this thing can make it around a couple of times without tipping over, cause it's very back heavy.

  • It's kind of tricky to get this to stand up on its own, with just the backpack being so heavy, like that end up being well, having Big V.

  • It's still just back at me.

  • Unfortunately, the kid does come with a stand and it looks so much better up on the stand anyway, just because it has again see you with it being on the ground, you can't really have the legs post and really cool way either.

  • They just kind of have to pose, just like straight down.

  • So it just doesn't really look good on the ground anyway.

  • Well, it was a pretty simple build.

  • Honestly, probably took about as much time to put the stickers on as it did to just actually build the whole thing.

  • So stickers do take a while and there are quite a lot of them.

  • But again, with it being ah, Sanju most versions of this and under you do have a lot of stickers and or decals they have to use for it.

  • Anyway, it's just kind of a trade of the design exposed.

  • But even before we get this loaded up into the mobile armor, we have a ton of different option parts here just for the Shannon do.

  • So let's take a look at these here first, right?

  • So here here is the stand, and it's very basic.

  • You can't really do a whole lot with this attachment point, I guess you could, like, flip it around this way.

  • But I don't think you're gonna want to have your signature, like flying horizontally.

  • We got the beam rifle here pretty cool.

  • You know, foils took her there for the camera for that.

  • Otherwise it just fits down into the hand.

  • And that is pretty much it does look nice.

  • We do also have the grenade launcher attachment for that which can blow up onto the bottom of here.

  • And so I'm really glad that that is included.

  • Of course, the handle for that was taken hold that just by itself.

  • The handle does look kind of dumb on there like that, but I'm really glad that at least the grenade launcher is included with this.

  • If you really don't want to handle in there, you could just laugh it off pretty easily.

  • Just cut that off.

  • Or if you do want to have this at actually as a separate handheld weapon, you can do that as well goes here.

  • We have the shield.

  • Now, the shield stickers were probably the most precarious.

  • To get the stickers on here was a little bit tricky, and I kind of did my best, and it looks all right.

  • But still, it's gonna be a little bit hard to get the stickers on There.

  • You have your connection peaceful.

  • Just plug into the center of the shield like that and you can plug the grenade launcher here onto the back of the shell just like other version of this non Jew.

  • You can do that here with the SD as well, which is pretty nice to complete that into there again.

  • You can cut off the handle if you don't need that on there that we have our beam axes, which are pretty cool.

  • You have two of these and you have to effect parts for them as well.

  • Effect parts are specifically for the left and the right.