Name: My Personal Rig Nebula is finally COMPLETE!
Uploaded: 2020-03-19T16:11:35.000Z
Duration: 19 min 10 s
Description: Thousands of YouTube videos with English-Chinese subtitles! Now you can learn to understand native speakers, expand your vocabulary, and improve your pronunciation...

Adverbs of manner

Jay's two cents here and Phil is actually out of town at a wedding.

Transition words & phrases

So this one is going to feel very much like classic Jay's two cents because I'm ready to finish my personal bill.

We've got all the parts we've been waiting on to get it done.

The lighting is gonna be really out of car contrast.

Give the gift of five performance portable gaming this holiday season with the main here element laptop ville, but all 25 micro center locations The Intel core I 7 97 50 h processor in video, Artie X 2070 Mexico graphics 32 gigabytes of DDR four and two terabyte N v M E S s d.

Make the element one of the fastest laptops around.

While the magnesium alloy I'd lightweight chassis keeping ultra portable while weighing in at only £4 to learn more about the element laptop for me and gear.

And to find the micro center location nears to you click the link in the description below.

Here is the color scheme that we're going with now.

Remember This is a nebula theme called it Nebula because the colors are going with our like a purple and blue, which have a very kind of a galaxy nebula look, So I'm starting wire this all up right now, and I'm noticing I don't like the door that's on this thing because, like I showed in Alaska, when you open it, it's like pinches off all the wires.

It makes it very difficult to wire them up.

And since I've got my key Beaumont cables right here, I did a piece cable, cable mod.

You can follow the Lincoln description below.

But as you can see, because the wiring here is so short because it's going to such a short run when you open the door, it kind of pinches off.

It makes it impossible to get these in there.

So I just decided to just take the door off.

The problem is that exposed parts of the case that weren't painted on this wall bracket here.

And so what I'm gonna do now is I'm gonna take the power supply back out, paint that while I sort of start getting everything wired up.

So one of the nice things about the inn when Crown fans that you can see right here we've got six up top to keep things nice and tidy.

So not only is the power days attainable, so is the RGB.

It's one cable and that controls both the power for the pumps or the fans as well as the RGB.

I wasn't sure whether or not I could actually use all six fans on a single daisy chain.

So I wired it up and I'm using this cheap power supply with a fan hub.

So I'm just kind of taking you guys along for this ride right here so you can see the way I do a lot of my testing as I go That way, I don't have to redo a lot of things, especially in a build like this.

This is not an easy build to take back apart.

We're also using a jumper on the end of our 24 pin.

This makes it so that when we flip on the switch right here.

You get power, and as you can see, all of them are running full speed because I wasn't sure who would lose any voltage across the board.

Now, the nice thing about a cease motherboards is they do have I'm looking for it here h amp fan and show There.

It's not focusing, but h and fan hitter, that's high EMP, which is nice that I can pull the wire, right.

So I have to do much in terms of wiring swarm into right now is I'm gonna go ahead and get this power supply shroud off of here.

I'm not gonna do any polishing to I'm going to a clear coat polishing.

It's on the back side and I'm going to see and it's through very tinted glass.

So that's why I made the tubing back here.

As you can see, we've got This is where it comes up off the pump, goes back over to the G pews, comes out of the GPS into the CPU and then into the top, right and all that.

So anyway, let me go and get the shroud off of here.

Even though I know it's not gonna be seen, I care.

All right, so while that is drying up, show you guys a couple of things that I got.

I just also got some thumbscrews that were in the same color.

And what's nice is I wasn't sure if they were gonna that they appear to be a pretty good match.

And these thumbscrews are gonna be for various places case, but mostly right here along the P C.

I express excuse right there so that we could just add a little bit more color to this because what's the RGB lighting is on.

Fans were on and stuff and make a lot more sense to the color theme.

So I got purple, black and blue, and I'm really impressed with how well that they match.

It's clearly a different shade of purple.

This is definitely more of like a point more of a violet, but it's close enough.

So I did a black purple, blue, blue, purple, blue blue black sort of similar to how the wow that shows you just how reflective this is, huh?

Anyway, but what I'm noticing is the black just sort of blends in because it's so dark in there, any way that I think I'm gonna replace the black purple.

I tried to do this with Skunk works with the green, put the green that I'm using it Skunk Works is just so neon and so bright that analyzing can't get that right.

I think I'm gonna have to move that purple up because I've got an extra school, right?

So I'm gonna do to purples in the middle.

That is what The purple blue blue purple role playing purple, blue, blue, purple patrol.

That's hard to say for purple, purple, blue, blue, purple.

And I know that, like some people may not like this, but I think once everything is lit up and all of the chrome and nickel is shining with all the colors of fans it'll just all tie in all the time I spent farting around with screws, I was able to get this painted.

You can see there's a slight difference in texture, but that's because this part was actually clear coded this part.

It's not like I was saying, Once it's in place here, you can't even tell.

But there's a slight texture change, which gives me a nice uniform bracket.

I guess without a door now, which will be a lot easier for the wiring the other night seemed to about the thumbscrews is I can use them on the power supply so they get the holes lined up because it's kind of difficult with this the way it is to get a screwdriver in there, you could use a little stubby screwdriver, but even this is kind of in the way.

So using the thumb screws in here, it makes it easier to mount the power supply and also gives just a little splash of color every time I go toe filmy style growing.

One of these stupid things in there I can't do it.

Tournament do now is I'm just gonna take the additional cables, get them all plugged in these two e.

So you've got to train these cables and use the combs to do that.

You can actually slide the combs kind of out of the way.

You see how I'm sort of training this one right now?

Thio go the way that I want and then what I usually do after they're nice and trained it, I just sort of slide it all the back across there, kind of like that.

That something sort of like that kind of unfortunate that I can't get a penny p.

E s combed together like I was able to do what the PC I'II plugs.

What I'll do is I'll kind of get the Radius.

I'll take these and just sort of like, Okay, it's got to go that way up and over the cliff, you say there's a clip right here.

Subtitles ListPlay Video

My Personal Rig Nebula is finally COMPLETE!

stuff

sort

mess

texture