Placeholder Image

Subtitles section Play video

  • Hello I'm Ivan and this week I tested 3d printing on fabrics with ABS. I've got an

  • old t-shirt and I fixed it on the building plate. Loaded a spool of ABS

  • and applied the following settings: no bottom layers, one outline, 100% infill,

  • two layers. I didn't heat the bed but I increased the hotend temperature to 255 C

  • hoping the ABS will better penetrate the fabrics. First I printed our company logo.

  • It consists in nine solid characters, so it was an easy print. It took around 2

  • minutes - well there are only two layers.

  • It came out nice and solidly sticked to the fabrics.

  • Then I tested a larger and more complex print like the Sting's signature. After the

  • first layer there was some displacement of the shirt on the x-axis but I

  • continued with the second layer and the end result was very ok

  • I don't know whether those will survive the washing machine but it survived this...

  • so 3d printing on fabrics could be a nice technique to make an original

  • t-shirt for an event and make an impression. Thanks for watching.

Hello I'm Ivan and this week I tested 3d printing on fabrics with ABS. I've got an

Subtitles and vocabulary

Operation of videos Adjust the video here to display the subtitles

B1 UK print shirt printing tested layer spool

3d print on tshirt

  • 55 1
    瑾萱 posted on 2018/03/06
Video vocabulary