Placeholder Image

Subtitles section Play video

  • Here's how to install Windows 10 from USB.

  • Use the clickable sections below to skip to a specific step.

  • Before we get started, we'll need a computer

  • to create our boot drive on.

  • Grab a blank USB drive

  • with a capacity of at least 8 gigabytes

  • to host those files.

  • On your computer, go to your browser

  • and search for "Windows 10 download."

  • Click on the result from Microsoft.com

  • and click "Download tool now."

  • Once downloaded, run the installation.

  • Click "Yes" to continue,

  • then agree to the terms and conditions.

  • As we're going to run the install off a USB device,

  • select "Create installation media"

  • instead of installing directly.

  • Recommended settings should be fine,

  • but we can change the language of the OS

  • or change to 32-bit depending on our system.

  • To create the USB install,

  • select "USB flash drive" and click "Next."

  • With your USB drive inserted into the computer,

  • it should appear under the list.

  • If not, refresh the drive list.

  • If it isn't showing up, try formatting it to FAT32.

  • Select the drive and continue.

  • Wait a few minutes while the creation tool

  • downloads the necessary files.

  • When it's done, click "Finish."

  • Now that our boot drive is ready,

  • insert it into the PC you'd like to install Windows to.

  • Make sure no other USB drives are plugged in.

  • Then boot up your PC.

  • It should load right into the Windows 10 installer.

  • If it doesn't, check to make sure that the USB drive

  • is selected in the PC's BIOS.

  • You can usually access this by tapping your delete key

  • while the PC boots up.

  • Select your language, time zone, and keyboard input

  • and click "Next"

  • and then "Install now."

  • You'll be asked to enter an activation key.

  • If you've purchased a copy of Windows 10, enter it now.

  • If not, you can still install by clicking

  • "I don't have a product key."

  • Windows 10 will run perfectly fine without a key for now.

  • Here, you can choose the hard drive

  • you want to install Windows onto and click "Next.

  • Now wait as Windows 10 installs to your PC.

  • When it's done, your PC should automatically restart.

  • Do not interrupt the boot process by shutting down

  • or unplugging your PC during this process.

  • Once it's finally booted up,

  • we should land at the Windows 10 setup screen.

  • From here, you can customize the OS to your preference.

  • With the setup prompts complete,

  • we're now at the desktop with a new copy

  • of Windows 10 ready to go.

Here's how to install Windows 10 from USB.

Subtitles and vocabulary

Operation of videos Adjust the video here to display the subtitles

B1 usb install pc drive click boot

How To Install Windows 10 From USB

  • 1 0
    林宜悉 posted on 2021/01/11
Video vocabulary